(your computer’s USB connection or the included power supply) before you can use it. It is essential that you fully charge the MicroTrack II battery before using your new recorder. Failure to fully charge the battery before first use can limit the capacity of the battery, lowering the total recording time of MicroTrack II.
Push the delete or power button to exit to normal operation mode. ‣ Once MicroTrack II has finished booting up, you will see the Main Menu. If the Main Menu does not appear, press the [MENU] button on the left side of MicroTrack II.
Page 4
[LEVELS] buttons will blink, indicating that the recording will be distorted, or clipped. ‣ Once you have set your recording level, press the [DEL] button. While setting your levels, MicroTrack II was actually already recording to a file. Pressing the [DEL] button and confirming by pressing the [DEL] button again will delete the small file you just recorded.
Playing Back Your Recording Now that you have an audio file on the CF card or Microdrive, you can play it back using MicroTrack II. MicroTrack II outputs audio through its RCA connections at the bottom of the unit and through the headphone output at the top of the unit.
Transferring Your First Recording to Your Computer Now that your first recording is saved on the CF card or Microdrive, you can copy this file from MicroTrack II to a computer. Once on a computer, your recorded file will behave like any other audio file of the same type, allowing you to rename, edit, and store the file in any location you wish.
Page 7
Double-click this icon to view files stored on MicroTrack. ‣ To copy a file from the MicroTrack II CF card or Microdrive to your computer, simply drag the file to the desktop of your computer, or to another location of your choice. When you drop the file in the desired location, it will be copied to this new location.
Page 8
User Guide For more information regarding all of the functions of MicroTrack II (there are many not covered by this guide), please refer to the User Guide contained on the CD-ROM. Place the CD-ROM in your computer’s CD-ROM drive. If you are using a Mac, double-click the CD icon on your desktop and then double-click “Open Me.”...