Büttner Elektronik E-Bike Charger Manual

Introduction

Dear Customer,
EN
with the purchase of the E-Bike charging
system you have chosen a quality product
from HYMER in cooperation with BÜTTNER
ELEKTRONIK.
This E-Bike charging system meets the
highest standards of quality and functio-
nality for a simultaneous charging option
of up to 2 bike batteries, even without an
external mains connection, in fully
automatic charging mode via alternator
24
while driving or in manual charging mode,
but also as usual with 230 V mains supply
with always optimal monitoring of your
leisure- / bord battery.
Before the first start-up, the E-bike Charger
control must be set-up. Please read about
this section "Basic Settings" on page 31.
We hope you enjoy your new E-bike
charger charging system.
Your HYMER / BÜTTNER ELEKTRONIK Team
Warning!
Danger!
! !
Warns of dangers to persons, damage to
the device or other objects. Injuries or
damage may result from improper hand-
ling. Failure to do so can lead to serious
damage, fire and personal injury!
Note
Tips and tricks
i
This icon is used to designate tips, which
help you to utilize your equipment even
easier and more efficient.
BÜTTNER ELEKTRONIK – HYMER E-Bike Charger