Advertisement
Quick Links
Advertisement
Related Manuals for Denver WS-650
Summary of Contents for Denver WS-650
- Page 1 WS-650 denver.eu 11/2022 [Skriv her]...
- Page 2 Safety information Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference. 1. This product is not a toy. Keep it out of reach of children. 2. Keep product and batteries out of the reach of children and pets to avoid chewing and swallowing. 3.
- Page 3 Overview Weather Station [Skriv her]...
- Page 4 Rain gauge sensor Temperature/humidity/Wind sensor...
- Page 5 Main unit 1. Snooze/light button 29. MODUS button: switch display mode 2. Number of temperature/humidity / 30. Data from precipitation sensor Wind sensor 1/2/3 31. Signal from precipitation sensor 3. Outdoor temperature 32. Low batteries in precipitation sensor 4. Cycling through data from connected sensors 33.
-
Page 6: Function Settings
16. Indoor humidity trend 43. Mounting holes 17. Indoor humidity Rain gauge sensor 44. Rain gauge battery sensor 18. Alarm no.1/no.2 45. Rain gauge sensor grille 19. Time DCF signal reception, Temperature/humidity/Wind sensor daylight savings time (DST) 46. Wind sensor cups 20. - Page 7 Specificatons Clock control: DCF77-radio signal Time format: 12/24 h Indoor temperature: 0 °C to +50 °C, 0,1 °C resolution Outdoor temperature: -40 °C to +60 °C, 0,1 °C resolution Temperature measurement accuracy: ±1 °C for range 20 °C to 24 °C ±2 °C for range 0 °C to 20 °C and 24 °C to 40 °C ±3 °C for range -20 °C to 0 °C and 40 °C to 50 °C Indoor and outdoor humidity:...
- Page 8 unit’s display To repeat the search, or press and hold the TX button(49) on the temperature/humidity/ wind sensor. You find the TX button under the battery cover. Placement of sensors To ensure correct measurements, the temperature/humidity /wind sensor and the rain gauge sensor must be placed at least 1.5m above the ground on a horizontal surface without buildings and structures nearby.
- Page 9 Changing channel and connecting additional sensors Press the channel button on the main unit’s display repeatedly to select the desired channel1.2 or 3 for the sensor. Then press and hold the channel button until the icon starts to flash. Remove the battery cover of the temperature/humidity/wind sensor and set the sensor switch to the corresponding channel you just selected.Data from the sensor will be loaded within 3 minutes.
- Page 10 Setting the unit for precipitation 1. Press the mode button 5 times, then press the set button for 3 seconds. 2. Use the up and down arrows to set mm or inches as units 3. Press the set button to quit settings Setting the unit for wind speed.
- Page 11 Today Last hour Yesterday This week Note: To delete the value being displayed, you press and should the down button. Manufacturer’s name trade mark, commercial Xiamen Innore Chongyuan Electronics Co., Ltd registration number and address No. 943, Tonglong Second Road, Tong'an District, 91350200568403208H Xiamen,Fujian, Model identifier...
- Page 12 Hereby, Denver A/S declares that the radio equipment type WS -650 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: and then click the search ICON on topline of website. Write model number: WS-650. Now enter denver.eu product page, and RED directive is found under downloads/other downloads.
Need help?
Do you have a question about the WS-650 and is the answer not in the manual?
Questions and answers