Easydive Leo3 Instructions

Right Hand Control

1. Autofocus (Exposure Reading) and Shutter Release Mode. To change the shooting
mode, hold down Button 1 until the Red LED is switched on (15 sec.).

2. Photo Shoot:

Mode 1: When you press the button you have the autofocus, when you release the
button you will have the shoot (Default Setting).
Mode 2: When you press the button first you have the autofocus and then the
shoot. (If the lens is already in focus you will have the direct shoot).
3. Change Mode (M/Av/Tv/P). Inser t the Camera in Mode M.

Manual Mode (M):

Shutter - Priority (Tv):

4. Aperture - 4. EV -
5. Aperture +
5. EV +
6. Shutter Speed -
6. Shutter Speed -
7. Shutter Speed + 7. Shutter Speed +
8. ISO +
Press the buttons 4,5,6,7,8,9 once to change by one step. Keep
9. ISO - pressed to quickly change the chosen parameter.
10. On / Off electronic board (to switch on press once, to switch off hold down about
3 seconds until the board is switched off). The camera will go in Standby limiting the
power consumption. To activate the Camera, after switch on the electronic card,
press the Button 2.
Easydive - Via dell'Industria 13 int 6, 48015 Cervia (RA) - Italy

Aperture - Priority (Av):

4. Aperture -
5. Aperture +
6. EV -
7. EV +
GFX100S
Hand Control - Right
Front
info@easydive.it - +39 0544 962923 | +39 338 9994219
Back