Boost Button & Power Level Times
Boost
Button & Power Level Times
To start or stop a chlorine generation cycle, press the Boost
To start or stop a chlorine generation cycle, press the
mode, it will switch to producing chlorine with an extended cycle, generating for 3 times as long. If the
mode, it will switch to producing chlorine with an extended cycle, generating for 3 times as long. If the
ChlorMaker was already producing chlorine, this cancels that cycle.
ChlorMaker was already producing chlorine, this cancels that cycle.
When pressing the button, the
When pressing the button, the Green
the button push.
the button push.
Note: The ChlorMaker cannot make chlorine faster; the
extended cycle. If the spa chlorine has dropped to 0 PPM (parts per million) from heavy usage, chlorine
may need to be added to help break past zero.
Note: If a chlorine cycle was started by pressing the
If a chlorine cycle was started by pressing the Boost
on when the chlorine is low), the salt status lights may flash instead of being solid.
on when the chlorine is low), the salt status lights may flash instead of being solid.
Vacation Mode
Vacation Mode
After a week of no button pushes, the ChlorMaker automatically switches to vacation mode, indicated
by all lights flashing in standby mode, instead of just the White one. While in vacation mode, the
ChlorMaker decreases the generation time to make less chlorine, to reduce the risk of over-chlorination
with inactivity. To exit vacation mode, simply press any button.
The amount the time is reduced accordingly:
1-2 weeks: 3/4 3/4 of Normal Time
•
> 2 weeks: 1/2 1/2 of Normal Time
•
For example, a ChlorMaker at power level 3 would normally generate chlorine for 15 minutes per cycle,
and would reduce to 11 minutes and 15 seconds after 1 week of inactivity, and then 7 minutes and 30
seconds after 2 weeks.
Power Level
1
1
2 2
3 3
4 4
5 5
6 6
7
7
8 8
9 9
10
10
ChlorMaker
ChlorMaker Manual
Manual
ChlorMaker Operation (cont.)
ChlorMaker Operation (cont.)
Green and
and Blue
Blue (
Normal Time
7 min 30 sec
7 min 30 sec
1 1 hr 30 min
2 2 hr 30 min
Boost button. If the ChlorMaker was in standby
button. If the ChlorMaker was in standby
(Salt High
Salt High and
and Salt OK
Salt OK) lights will flash, acknowledging
Boost
button simply turns it on for a single
Boost button (as opposed to automatically turning
button (as opposed to automatically turning
White
White
2 min
2 min
15 min
15 min
30 min
30 min
4 4 5 min
5 min
1 1 hr hr
hr 30 min
2 2 hr hr
hr 30 min
3 3 hr hr
) lights will flash, acknowledging
Boost Time
6 min
6 min
22 min 30 sec
22 min 30 sec
45 min
45 min
1 hr 30 min
1 hr 30 min
2 hr 15 min
2 hr 15 min
3 3 hr hr
4 4 hr 30 min
hr 30 min
6 6 hr hr
7 7 hr 30 min
hr 30 min
9 9 hr hr
13
13
Need help?
Do you have a question about the ChlorMaker and is the answer not in the manual?