Advertisement
Quick Links
Advertisement
Summary of Contents for PowerTech SL2252
- Page 1 Smart Wi-Fi LED Bulb with Colour Change SL2252 User Manual...
- Page 2 Smart LED Bulb User Guide NO.1 Download and install the App Search and down load “Smart Life” in major application markets or scan the QR code below to download the APP NO.2 Sign in App...
- Page 3 Smart LED Bulb User Guide Fig. 1 Fig.2 Registration If you don not have an app account, you may choose to register or log in by authentication code. The registration process in described on this page and the next. 1. Click“Register” to go to the smart life privacy policy page.
- Page 4 Smart LED Bulb User Guide NO.3 Add device When install the light, please reset it to enters the...
- Page 5 Smart LED Bulb User Guide networking state. The steps is: ON-OFF-ON-OFF-ON-OFF-ON(interval time shall not exceed 2 second but more than 1 second) until it flashes rapidly. Switch time interval shall exceed 10s. Then confirm lights blinks rapidly, tap “+” at the upper right corner of the “Devices”...
- Page 6 Smart LED Bulb User Guide 1. The app supports two configurations: Default mode and AP mode. Click "AP Mode" at the top right corner of the "Default mode" page to switch between modes 2. To select "Default mode", please make sure the indicator light on the smart device is flashing rapidly (blinking twice per second) and then click the button to proceed to the next step...
- Page 7 Smart LED Bulb User Guide 1. To select "AP Mode", please make sure the indicator light on the smart device is flashing slowly (blinking once every three seconds) and then click the button to proceed to the next step. 2. If the indicator light is not flashing slowly, click "Help"...
- Page 8 Smart LED Bulb User Guide Enter Bluetooth password In a selected mode, clicking confirm button on the page when the indicator light flashes rapidly/slowly will bring up the page shown in pic Select the Wi-Fi in the work area of a device that can enable successful Internet connection, enter the Wi-Fi password, and click "OK"...
- Page 9 Smart LED Bulb User Guide If default mode is selected, app configuration will be completed. Successful configuration will appear. Names of devices that have been configured successfully can be changed, and the locations of the rooms where the corresponding devices are can be selected.
- Page 10 Smart LED Bulb User Guide NO.4 Control Devices 5.1 Individual Control Open the control panel for devices. For example, Fig. 1 shows the light is off, and only the timer can be accessed in the off mode. Fig. 2 shows the light is on, and scene, color, brightness, and schedule can be configured in the on mode.
- Page 11 Smart LED Bulb User Guide device page, as shown in Fig. 1. 2.The page displays all devices with the same model number and available to be added as a group. Select a device and click “Save”, then enter group name and click “Confirm” to finish, as shown in Fig.
- Page 12 Smart LED Bulb User Guide him. 2. Integration: Connect Amazon Alexa & Google Home instruction manual. At present there are only 3 orders available in Amazon Alexa and Google Home: color changing, brightness setting and switch on or off the light. NO.6 Note 1.After you power off the light and power it back on, you have to connect the first WiFi to control the...
Need help?
Do you have a question about the SL2252 and is the answer not in the manual?
Questions and answers