Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KessTech ESM2
Summary of Contents for KessTech ESM2
- Page 1 INSTALLATION MANUAL Harley-Davidson VRSC 2in2 ESM2 ESM3 Feel the Sound.
- Page 2 02. Place the delivered spacer on the mounting screw between the frame and the accumulator. Place the M8 nut back on the screw. Tighten after the exhaust is mounted straight. HD VRSC 2IN2 ESM2 ESM3 02a Model specific features: Spacer for Street Rod, Night Rod Special 2007 up, and V-Rod Anniversary 2012. Place the 7mm spacer on the OEM mounting screw between the frame and auxiliary volume, place the M8 nut back on the screw.
- Page 3 03. Mount handlebar switch with the help of the supplied screw. HD VRSC 2IN2 ESM2 ESM3 03 04. Solder the KessTech electronics into the existing electronics. Use cable colors and pin according to the wiring diagram KessTech electronics. example of soldering HD VRSC 2IN2 ESM2 ESM3 04 05.
- Page 4 After about 200 kms retighten all exhaust screws and after every service intervals as well as every 4,000 kms. If not correctly performed, the KessTech warranty will be void. If there is any subsequent change of the exhaust, the vehicle type-approval will be invalid.
- Page 5 KessTech cannot evaluate whether the installation of further accessory parts together with a KessTech exhaust system is possible and still legal and therefore assumes no warranty or liability. Our Technical Support will be happy to answer any question.
Need help?
Do you have a question about the ESM2 and is the answer not in the manual?
Questions and answers