Advertisement
Parts List:
3 x Metal pole
1 x Top Handle
1 x Pad Base
2 x Cleaning Pads
1 x Bucket
Easy Two-step Assembly:
The mop is now fully assembled and the Bucket arrives ready for use. Nothing more required.
Squeeze Mop & Bucket Set
Step 1: Starting with the Top handle, screw the bottom of each rod
into the top (grey connector) of the next rod until all four parts
have been connected.
Step 2: Insert the end of the assembled mop into the connector on
the back of the mop head and push firmly until it clicks into place.
Once connected, the mop head will be able to pivot 180 degrees as
shown below.
Advertisement
Table of Contents
Summary of Contents for AVILO 4568488
- Page 1 Squeeze Mop & Bucket Set Parts List: 3 x Metal pole 1 x Top Handle 1 x Pad Base 2 x Cleaning Pads 1 x Bucket Easy Two-step Assembly: Step 1: Starting with the Top handle, screw the bottom of each rod into the top (grey connector) of the next rod until all four parts have been connected. Step 2: Insert the end of the assembled mop into the connector on the back of the mop head and push firmly until it clicks into place. Once connected, the mop head will be able to pivot 180 degrees as shown below. The mop is now fully assembled and the Bucket arrives ready for use. Nothing more required.
- Page 2 Guide for use: Simply remove the lid of the bucket and fill with water, along with any floor cleaner or detergent you may want to add. Replace the lid securely on the bucket and slide the mop first into the water/cleaning solution, then into the dry chamber to remove any excess water. Pull back up and sweep along the floor to clean. Note: The bucket has two chambers with a seperating wall between them. Make sure the dry chamber does not hold water by never over- filling the bucket. How to replace cleaning pad: Simply peel off the old cleaning pad and slowly roll the new pad over the end, making sure it is accurately aligned with the edges of the mop head. Firmly push around the edges of the cleaning pad, to ensure it How to fit the microfibre pad: adheres to the adhesive strips. Batch No: 4568488 Product Code: L202208 Made in China for S&S Enterprises Ltd. 26 Perivale Park Middlesex UB6 7RL...
Need help?
Do you have a question about the 4568488 and is the answer not in the manual?
Questions and answers