Sharp AQUOS 4P-B65EJ2U Operation Manual page 32

[ENGLISH]
Contents
1. Part Names
2. Introduction
3. Direct Button Operation
4. On-Screen Display Menu
1. Introduction
2. Menu Operation Buttons
3. Video / Audio Settings
4. Setup
5. Parental Control
5. Application
6. Using a PC
7. Appendix
8. Specifications
9. Trademarks
10. Dimensional Drawings
Ver. 1.0.0
>> On-Screen Display Menu
<< Setup (Continue)
Public Mode
Setting item
Selected item
Value
Off
RC Path through TV RCE
TV RCD
Reset -
Execute -
NOTE
How to exit from Public Mode:
Once it is set to the "Public Mode" with "On Screen Display" is set to "off".
It is unable to exit Public Mode by using remote control.
Here are the steps to exit the Public Mode even if "On Screen Display" is set to "off".
1. Turn off the display.
2. Unplug the display.
3. Plug-in the AC cord and press and hold "OK" button on control panel.
* Remain pressing and holding "OK" button until reboot is complete.
4. The display will be launch with Public Mode only mode.
5. You can change settings of Public Mode.
Description
Prohibit output IR signal by control "IR-path" port.
Allow output IR signal to by control "IR-path" port.
Allow output IR signal by control "IR-path" port and prohibit RC input.
Reset to default.
TV memorized current value set.
en-US 31