Pole Mount - Lowrance LGC-2000 Installation Instructions Manual

Pole Mount

The GPS module attaches to the pole mount
adapter with the supplied 4mm screws. You
can route the cable through the slot in the
side of the module and down the side of the
pole. Or, you can pass it down through the
pole mount adapter and run the cable inside
the pole. The 1"-14 threads on the pole
mount adapter accept a standard marine
antenna mount.
GPS module mounting template.
Pole mount adapter
with module attached.
Drill size 3/16" (4.75 mm)
Drill four places.
3
Drill size 1" (25 mm )
(If needed.)