AQUA NOVA N-FEED-LCD - Auto-Feeder Manual

AQUA NOVA N-FEED-LCD - Auto-Feeder Manual

Advertisement

AQUA NOVA N-FEED-LCD - Auto-Feeder Manual

Features

  • Accurate electronic control and clear LCD display.
  • 5 different setting time with 1 – 3 rounds feeding, to meet various needs.
  • Suitable for food pellet and flake.

Overview

Operations

  1. Open the battery housing, fix 2 AA batteries well.
    Press the "MANUAL" button, to make sure the food container can function well.
  2. Take down the food container, close the feeding outlet and open the bottom cover to fill with food. Then re-assembly it to feeder host.
  3. Auto feeding function as below instructions:
    1. Standard time setting (see picture 1):
  • Press "SETTING" button, when the HOUR 2 digits twinkle, press "+" or "-" button to set local standard HOUR time.
  • Then press "SETTING" button, when the MINUTE 2 digits twinkle, press "+" or "-" button to set local standard MINUTE time.
  • Finally, let the digits twinkle for one minute, local standard time will set up.
    Operations - Step 1 - Standard time setting
  1. Feeding time & feeding round setting (see picture 2, 3, 4)
    After setting up the local standard time, you can start to set up feeding time and round.
  • Please refer to Picture 2.
    Press "SETTING" button, when the bottom squares outline and HOUR 2 digits twinkle together, you can start to set the 1st feeding time and round. Press "+" or "-"button to set your 1st feeding HOUR time.
  • Then, press "SETTING" button, when the bottom squares outline and MINUTE 2 digits twinkle together, press "+" or "-"button to set your 1st feeding MINUTE time.
  • Press "SETTING" button again, when the bottom squares outline twinkles, press "+" or "-" to your preferred feeding round (1, 2 or 3 round). When "1" shows in 1st small square, means 1 round. When "2" shows in 1st small square, means 2 rounds. When "3" shows in 1st small square, means 3 rounds.
  • Then, let the digits twinkle for one minute, the 1st feeding time and rounds will set up.
  1. Please refer to below pictures.
    The 2nd, 3rd, 4th and 5th feeding time and rounds are same operations as the 1st feeding.
    The 5 small squares shown feeding round(s) against 5 different feeding time.
    Please refer to below 6 typical examples to elaborate setting operations.
  • Means local standard time 10:33
  • Means the 1st feeding is at 8:30 and 3 rounds.
  • Means the 2nd feeding is at 12:00 and 2 rounds.
  • Means the 3rd feeding is at 15:30 and 1 round.
  • Means the 4th feeding is at 19:00 and 3 rounds.
  • Means the 5th feeding is at 23:30 and 2 rounds.

If you do not need all 5 different feedings, you can set up your feeding among 1-5. Do not need to follow feeding sequence strictly.

  1. Manual feeding:
    If you wish to enjoy feeding manually, please press the "MANUAL" button, the food container will run and feed accordingly.
  1. Fix the LCD auto feeder to the edge of tank, adjust the feeding outlet width according to necessary, then the feeder can start to work.
  2. Special reminder
    Keep away from water. In case any water go inside, please handle immediately.
    Take out the batteries if the LCD Auto-Feeder will be unused for long time. Please renew batteries when LCD Auto-Feeder can not run powerfully.
    Operations - Step 2 - Standard time setting

The manufacturer provides a 24 month guarantee, beginning on the date of purchase. The guarantee covers defects arising from manufacturer fault i.e. defective materials or workmanship. It does not cover mechanical and other damage caused by improperhandling or construction changes introduced by the user. If a claim is to be made, please return to the shop, where you have bought this product, and present receipt showing date of purchase, proof of date and purchase is a prerequisite for accepting the claim.

Disassembly
It is forbidden to dispose of used electric and electrical equipment in a trash bin. Segregating and proper utilization of this king of waste leads to conserving the resources of natural environment and allows avoiding negative influence on health as it can be endangered by improper waste handling. The user is responsible for delivering the used product to a specialized collection point where it will be accepted free of charge. You can obtain information about such a facility at the local authorities, or by asking either the seller or the manufacturer service.

EURONOVA POLSKA Sp. z 0.0.
POLAND, 87-300 Brodnica, ul. Sikorskiego 60a
www.aqua-nova.pl

Petras Fisheries Pty Ltd
2158, NSW, Australia, 9 Bangor Road, Dural
+61-2-96522125, www.novaeuro.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AQUA NOVA N-FEED-LCD - Auto-Feeder Manual

Advertisement

Need help?

Need help?

Do you have a question about the N-FEED-LCD and is the answer not in the manual?

Questions and answers

Table of Contents