Cateye Air GPS Instruction Manual page 17

Use trip data (FIT files) on a PC
When the Air GPS is connected to a PC using the supplied USB cable, the Air GPS appears
on the PC as a removable disk, making it possible to check trip data saved on the Air GPS.
Connect the Air GPS to the PC using the supplied USB cable.
Saved trip data (FIT files) can be found by clicking [GPS100] > [ACTIVITY].
Details of trips, including trip routes, can be viewed by uploading trip data (FIT files) to
service sites.
Deleting unnecessary FIT files is also allowed.
* Before disconnecting the USB cable, perform Safely Remove Hardware process for
[GPS100] on a PC.
Caution!:
•
Keep the rubber cover firmly in place to maintain waterproofness.
•
When the Air GPS is connected to a Mac, the [GPS100] icon may still be displayed
on the screen even after the removal procedure. Regardless of the displayed [GPS100]
icon, the USB cable can be disconnected after the removal procedure.
Viewing measurement data
17
Cover,
Introduction
1
Setup
2
Mounting on a
bicycle
3
Starting
measurement
4
Measurement
Measurement results
results
3/3
5
SET
Changing settings/
Using sensors
Frequently
Asked
Questions
Appendix