Page 1
Replaces October 2008 Original instructions Puncture detector for Abaque squeezed tube pumps INSTALLATION OPERATION Your distributor : Z.I. La Plaine des Isles - F 89000 AUXERRE - FRANCE Tel. : +33 (0)3.86.49.86.30 - Fax : +33 (0)3.86.49.87.17 contact@mouvex.com - www.mouvex.com...
Page 2
This manual, with all instructions and precautions, is to be read in its integrality BEFORE any use of the MOUVEX pumps. All warning and untilisation labels and stickers are to be left in place.
Page 3
1. WORKING PRINCIPLE The pipe puncture detection of the squeezed tube pump is The capacitive proximity detector detects metallic and non ensured by a capacitive proximity detector mounted on the metallic materials. level pipe of the pump. 2. TECHNICAL CHARACTERISTICS Capacitive detector .
Page 4
4. DETECTOR MOUNTING Position the detector output to the bottom. The detector nuts are tightened after the detector has been mounted. Mounting of all elements with teflonized paste. A/AS : 10 - 15 - 20 The detector nuts are tightened after the Position the detector Position the detector detector has been mounted.