Peter Lynn Zero4 PRO CARBON BAR User Manual

Advertisement

Quick Links

1 Rear line attachment knots
2 Top line attachment
3 Top line safety system attachment
4 Rear leader lines
5 Power adjusting strap
6 Safety leash
7 Stopper ball
8 Neoprene line cover
TO ENSURE YOU ARE USING THIS BAR WITH OPTIMUM SAFETY
AND COMFORT, YOU MUST HAVE COMPLETELY READ AND FULLY
UNDERSTOOD THIS MANUAL PRIOR TO USING THIS PRODUCT.
REGULARLY CHECK OUR WEBSITE FOR PRODUCT UPDATES.
USER MANUAL
1
2
4
8
10
11
16
3
5
6
7
9
12
13
14
9 Depower line
10 Carbon bar with center hole
11 Line winder
12 Quick release depower loop
13 Removable depower loop lock
14 Safety leash quick release
15 Safety leash attachment for spreader bars
16 Spinning (Swivel) Spreader (optional)
1
4
8
11
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zero4 PRO CARBON BAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Peter Lynn Zero4 PRO CARBON BAR

  • Page 1 USER MANUAL 1 Rear line attachment knots 9 Depower line 2 Top line attachment 10 Carbon bar with center hole 3 Top line safety system attachment 11 Line winder 4 Rear leader lines 12 Quick release depower loop 5 Power adjusting strap 13 Removable depower loop lock 6 Safety leash 14 Safety leash quick release...
  • Page 2 • Do not use this product when your body weight is over 130kg (285lbs). • Only use this bar in combination with Peter Lynn Twinskin kites. When using this bar with different kite models, contact the manufacturer to ensure this bar is compatible with your...
  • Page 3 Attaching the flying lines Attach the top lines to top line attachments at 2 and 3, attach the rear lines to the rear leader lines at point 1 and 4. For 1, 2 and 4 Place a larkshead knot in the sleeve of the flying line and slide it over the knot on the leader line.
  • Page 4 Attaching safety leash attachment to spreader If you do not have a ring on the hook of your spreader bar, you can use the extra webbing provided. When you have a spreader bar with a rotating hook, place the webbing over the hook, and wrap the velcro around it to prevent it from falling off.
  • Page 5 Power adjuster The power adjuster enables you to adjust the overall power of the kite. To increase the overall power of the kite: To reduce the overall power of the kite: Pull the part of the webbing loop attached to Pull the part of the webbing loop coming out of the small ring on the top of the clip.
  • Page 6 Safety releases When things get out of hand you might want to use your safety release. The Zero4 pro car- bon bar is fitted with three releases. You will find a quick release on the depower loop, a quick release on the optional large harness line and a quick release on the leash. When things get out of hand, use the quick release on the depower loop and/or optional large harness line first.
  • Page 7 Activating the depower loop quick release To activate the quick release on the depower loop, grab the red ball and/or red tag and firmly pull backwards and let go. The loop will open up. Re-connecting your depower loop quick release Push the end of the loop (A) back though the webbing (B) using the thin black tag (C).
  • Page 8 • Before winding up your lines, take off the neoprene end covers, wind up the lines and pull the covers back over. More info For more info about Peter Lynn products, please visit our website: WWW.PETERLYNNKITEBOARDING.COM...

Table of Contents