Steren TRACKER-100 - Bluetooth Tracker Manual

Steren TRACKER-100 - Bluetooth Tracker Manual

Advertisement

Steren TRACKER-100 - Bluetooth Tracker Manual

CAUTIONS

Read this instruction carefully to avoid any malfunction.
Please check our website (www.steren.com) for the most recent version of the instructions.

  • This device is not intended for use by people (including children), whose physical, sensory or mental abilities are different or reduced, or who lack experience or knowledge.
  • Children should be supervised to ensure they do not use the device as a toy.
  • Do not use or store the product in places where there are leaks or splashes.

The images presented correspond to a device with an IOS operating system. Icons, interface settings and functions may vary depending on the version of the application and the operating system used.

"Operation of this equipment is subject to the following two conditions:

  1. this device or device may not cause harmful interference, and
  2. this device or device must accept any interference, including interference that may cause undesired operation. . "

NOTE: You can connect up to 4 trackers to your Smartphone

BEFORE STARTING

Place or replace the battery

Using a pointed object, separate both tracer caps
Place or replace the battery - Step 1

Place a CR2032 button-type battery
Place or replace the battery - Step 2
Pay attention to the polarity when placing the battery

Close the compartment again
It is recommended to change the battery every 40 days

On / Off Tracker

To turn on, press and hold the button for 3 seconds until you hear a beep.
To turn off the tracker, press the button 5 times until you hear three beeps.

INSTRUCTIONS

Download the application "small lovely ii" from the application store of your smartphone


Small lovely II
This application is not owned by Steren;
The company is not responsible for its nor updates.

Activate the Bluetooth of your smartphone
INSTRUCTIONS - Step 1 - Activate the Bluetooth

Open the small lovely II application. You will see that the tracker is connected to your smartphone. INSTRUCTIONS - Step 2 - Open the application

To edit and configure the tracker, slide to the left as shown in the image and press Edit. INSTRUCTIONS - Step 3 - Slide to the left

Setting descriptions

Setting descriptions

Functions

  • Locate the tracker with the smartphone
  1. Within the application, press the name icon.
    Functions - Step 1 - Press the icon
  2. Press the horn symbol. (The tracker will start playing).
  3. When you locate the tracker, press the horn symbol or the tracker button again to silence the alarm.
    Functions - Step 2 - Press the horn symbol
  • Locate the smartphone with the tracker

Press the tracker button twice to sound the alarm on the smartphone.
When you find your smartphone turn off the alarm from the application.

NOTE: The application must run in the background for proper operation.

Functions - Step 3 - Locate the smartphone

  • Alarm by distance
    To configure the alarm at short or long distance go to the Edit section to select the type of alarm it requires:
    Functions - Step 4 - Alarm by distance

Long distance alert
The smartphone and the tracker will sound if there is an approximate distance of 20 meters between them or if the Bluetooth link is lost.
Functions - Step 5 - Long distance alert

Short distance alarm (Close distance alert)
The smartphone and the tracker will sound if there is an approximate distance of between 5 and 10 meters between them.

Functions - Step 6 - Short distance alarm

SPECIFICATIONS

  • Tracker input: 3 V (CR2032)
  • Audio intensity: <90 dB
  • Humidity: 40% to 50%
  • Working temperature: 40 to 50°C
  • Storage temperature: 10 to 60°C
  • Operating frequency: 2.4 GHz
  • Operating maximum distance: up to 20 m (open areas)
  • Bluetooth v4.0
    SPECIFICATIONS

Product: Bluetooth tracker
Model: TRACKER-100
Brand Name: Steren

This policy guarantees the product for a term of one year in its components and labor, against any defect of manufacture and operation, from the date of delivery.

WARRANTY

  1. To make the guarantee effective, present this policy and the product, where it was acquired or in Electronics Steren S.A. Of C.V.
  2. Steren Electronics S.A of C.V. Undertakes to repair the product in case of defective without charge to the consumer. Transportation costs will be covered by the provider.
  3. The time of repair in no case will be more than 30 days, counted from the reception of the product in any of the places where the guarantee can be made effective.
  4. The place where you can purchase parts, components, consumables and accessories, as well as make this warranty valid is in any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

  1. When the product has been used in conditions other than normal.
  2. When the product has not been operated in accordance with the instructions for use.
  3. When the product has been altered or repaired by personnel not authorized by Electrónica Steren S.A. Of C.V. The consumer may request that the guarantee be effective before the commercial house where he purchased the product. If this guarantee is lost, the consumer can use his supplier to issue another policy, upon presentation of the respective purchase note or invoice.

RETAILER INFORMATION
Name of Distributor:
Home:
Deadline:

In the event that your product presents a fault, go to the distribution center nearest to your address and in case you have any questions or concerns please call our Customer Service Center, where we will gladly assist you in everything related With its Steren product.
Customer Service Center 01 800 500 9000


www.steren.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Steren TRACKER-100 - Bluetooth Tracker Manual

Advertisement

Need help?

Need help?

Do you have a question about the TRACKER-100 and is the answer not in the manual?

Questions and answers

Table of Contents