Subscribe to Our Youtube Channel
Related Manuals for Chelino BABY DAYTONA STAGES II
Summary of Contents for Chelino BABY DAYTONA STAGES II
- Page 1 INNOKIDS YC06 series version 20.05.08A0 !!EBZUPOB!TUBHFT!JJ! !!JOTUSVDUJPO!NBOVBM! 0 12 Group：0+,I, II, III Car child safety seat Weight: 0-36KG V E HI C L E C R S Age: Birth-12-years-old CHILD RE S TR AINt System...
- Page 2 The store of baby car seat......32 and illustrations shown in this manual are generic. Therefore products fabric, colour and design may vary from images shown, Chelino reserves the right to alter products specifications...
- Page 3 10.DO NOT use this child restraint if it has damaged or missing parts. Important notice before using 11.When use this child restraint in baby or toddler mode, the safety belt must be used correctly, and ensure that any lap strap is worn low down, so that the pelvis is firmly engaged.
- Page 4 20.A baby car seat is prohibited in a foldable car seat without locking 33.Do not place the child restraint in seating positions where an correctly, an emergency brake without a lock on the back of the seat active frontal airbag is installed if your child is still in rear facing may invalidate the baby car seat.
- Page 5 Tether strap Parts List adjuster Top tether The belt guiding Strap for fixing hook hook for group II,III Top tether hook Headrest Head pillow Car belt guide way for Group II,III Shoulder pad Buckle Inner cushion Buckle pad ISOFIX adjustment Adjuster button release button Harness...
- Page 6 Installatoin method (based on your child’s weight) Do not install this child restraint under the following conditions: This baby car seat has four mass group based on (GB27887-2011) and (ECE R44/04), Please choose the way to install the mass group corresponding to the children's immediate weight .
- Page 7 Installation way selection of Group 0+,I How to install ISOFIX 3-point seat belt ISOFIX+Top tether Group 0+ P8, 9 Fit the ISOFIX attlachments Extend the ISOFIX attlachments P11, 10 guides with the ISOFIX connectors by depressing on the attlachments anchor points. release button.
- Page 8 Group 0+ Installation with ISOFIX and top tether. Group I forward facing (Installation with ISOFIX and seat belt) Rearward Group 0+ position Forward position Group I Suitable for 0-13 Suitable for 9-18 children weighing (New born to 18 months) children weighing Press the rotating button to Rotate the seat to forward (9 months to 4 years old)
- Page 9 Group 0+ installation with car belt only Group 0+ Fasten car seat belt and ensure that the shoulder strap and the belly strap pass through the guide Suitable for manager at the bottom. 0-13 Click children weighing (New born to 18 months) Rotate the seat to reaward direction.
- Page 10 Group I forward facing (installation with seat belt) Group I Suitable for 9-18 Unlock the harness and lift up Pass the seat belt through the children weighing the inner cushion. seat as shown,put the inner (9 months to 4 years old) cushion back.
- Page 11 Group 0+/I (Using 5 point harness to fix child) Pass the shoulder strap of the Fasten car seat belt and ensure that the shoulder strap and the car seat belt through the seat belt guide hook. belly strap pass through the guide manager at the bottom.
- Page 12 Group II Group III (Installation with seat belt) Position 1 Group II Group III Suitable for 15-36 Make sure the buckle is Pull the retractor belt to the children weighing properly engaged. right tightness. (3 to 12 years old) Rotate the seat to forward direction,transfer to group II/III ISOFIT pull our the seat belt entirely...
- Page 13 Release ISOFIX To fix top tether correctly at rearward installation Importamt: Push use the longer strap. Prop up baby car seat with Pressing on release button your knees. and pull back to release the ISOFIX connector. (Use the top tether correctly,a void twisting the belt,install the fixed hook with open side down.) Adjustment: about the shorter top tether Press the button on top tether...
- Page 14 Recline adjustment 5 point harness adjustment Adjusting the harness according to the current situation of child,make sure there no any twisting. Pass the harness adjustment button Find the red hand lever, pull it up to adjust the position. To loosen To tighten Rearward This safety seat have 3 positions for forward installation.Group I...
- Page 15 Head rest adjustment Lift the upper plap upward and Press the harness adjustment pull the lower flap forward. button and loosen the straps. Pull the head support adjustment, meanwhile pull up or push down the head support. Shoulder Store the shoulder harnesses Lift up cover of bottom,remove IMPORTANT Group II III, The belt guiding...
- Page 16 Rotate/changing direction The car seat is with 360 degree rotating base which could be fixed with 4 direction. Warning Rearward Never use any unblock direction, Squeeze the rotating button while rotating the seat. fixed direction before using. Forward Important Rearward facing Forward facing Side facing Beckrest could be locked at 4...
- Page 17 Detach soft goods Remove the buckle pad, Remove the headrest cloth press the red button to Raise the back cushion under conceal the buckle in the buckle cover. disengage the buckle. the headrest. hole on the seat base. Seat cloth cover mounted: To assemble soft goods ,reverse the steps above.
- Page 18 Maintenance Post-accident treatment In the event of a violent collision and accident, please replace it Safety seat maintenance with a new seat. If you have any other questions, please contact After removing foam of infant insert,please store it somewhere that the distributor or manufacturer.
Need help?
Do you have a question about the BABY DAYTONA STAGES II and is the answer not in the manual?
Questions and answers