Program Timer Recording
There are two program timer recording methods, daily
recording or recording on certain days of multiple weeks
(weekly recording).
Example 1 : To record on every Thursday from 10 : 00 to
18 : 00 , in 18-hour mode (recording speed)
1
Make sure that the set date and time are correct.
2
Load a cassette tape with erasure prevention tab in
place.
3
Press the MENU, SHIFT
buttons in sequence to display the TIMER PROGRAM
SET(1) menu.
• The white block cursor is on "SUN"(Sunday).
4
Press the SHIFT
5
Press the SHIFT
• The cursor is moved to the recording start hour position.
6
Press the SET - (or +) button to set the recording
start hour (eg : 10), then press the SHIFT
• The cursor is moved to the recording start minutes
position.
7
Press the SET - (or +) button to set the recording
start minute (eg : 00), then the SHIFT
• The cursor is moved to the recording stop hour position.
8
Press the SET - (or +) button to set the recording
stop hour (eg : 18), then press the SHIFT
• The cursor is moved to the recording stop minutes
position.
16
, SHIFT
, SHIFT
button, until the cursor is on "THU".
button.
button.
button.
button.
Time Lapse Video Cassette Recorder
9
Press the SET - (or +) button to set the recording
stop minutes (eg : 00), then press the SHIFT
button.
• If the set stop time is
earlier than or the same
10 Press the SET - (or +) button to select the recording
time as the set start time,
speed (eg : 18), then press the SHIFT
the VCR will consider the
stop time to be the
• The cursor is moved to the N/Y position.
following day.
11 Press the SET - (or +) button to select "Y".
Y . . . . . recording will take place
N . . . . . recording will not take place
• Repeat steps 4 to 11 to program timer recordings for
other days of the week.
• To set two or more timer recordings the same day of
the week, press the SHIFT
located in the day of the week for the second recording,
then press the SET - (or +) button, to set the desired
day of the week. With each press of the SET - ( or +)
button, the day will change as indicated below.
SET - :
12 Press the MENU button three times, the normal
screen is displayed.
• To modify or cancel timer
13 Press the STANDBY/ON(POWER) button.
recording, press the
• The timer recording indicator "
STANDBY/ON(POWER)
button to cancel the timer
display panel. The VCR is now in timer recording
recording mode.
stand-by mode.
Time Lapse Video Cassette Recorder
Programmed timer recording Example 1
button, until the cursor
direction , SET + :
direction
"
will light on the
button.
17