Summary of Contents for G&G Paw Brothers PBP89430C
- Page 1 Paw Brothers ® Professional Hybrid Cages PBP89430C & PBP89435C Assembly Instructions Copyright © 2013, G & G Distribution, Inc. All Rights Reserved...
- Page 2 Initial Inspection When your Paw Brothers® Professional Hybrid Cage arrives, check immediately for signs of shipping damage. If you notice damage, save the shipping carton for claim purposes, and im- mediately report the problem to your supplier and to the shipping company. Caution: Use safety gloves when handling all par ts.
- Page 3 Assembly Instructions: Step 1. Unpack all cage parts and compare all the pieces to the parts list. Step 2. Using a #2 Phillips screwdriver, put two side panels and top/bottom panel together with sheet metal screws. The flanges face out as shown in Figure A below. Step 3.
- Page 4 Step 6. Assemble the Door Assembly to the cage using the Hex Head Fasteners as shown in Figure E. Hex Head Fastener installation Figure G Step 7. Place the Floor Grate in the cage. Slide the ABS Plastic Pan underneath the grate. See Figure G.