Manual Exposure - Sony Alpha 7RV Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM5
α7RV

Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
Set the Still/Movie/S&Q dial to the desired shooting mode.
1
Set the mode dial to M (Manual Exposure).
2
Select the desired aperture value by turning the front dial.
3
Select the desired shutter speed by turning the rear dial L.
You can set which dial changes the aperture value and shutter speed with [
Custom Key/Dial Set.].
You can also set [
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [ ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable
for appropriate exposure. If this happens, change the shutter speed or aperture value.
When [ ISO] is set to other than [ISO AUTO], use "M.M." (Metered Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the camera.
*
Indicates under/over for appropriate exposure. It is displayed using a numerical value on the monitor and with a metering indicator on
the viewfinder.
Adjust the focus and shoot the subject.
4
Hint
By rotating the front dial/rear dial L while pressing the AEL button, you can change the shutter speed and aperture (F-value)
combination without changing the set exposure value. (Manual shift)
Note
The Metered Manual indicator does not appear when [
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the screen may differ from the actual image being shot.
Related Topic
ISO (still image/movie)
Bulb shooting
ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
5-044-866-11(1) Copyright 2022 Sony Corporation
ISO] is set to [ISO AUTO].
117 117
Custom Key/Dial Set.] or [