Airpura UV700 User Manual page 10

REPLACING THE CARBON FILTER
1. Remove the HEPA
filter located in the
center of the unit and
set aside.
4. Insert the tube into
the filter chamber
inside the prefilter,
opening the top of the
spiral to make a slight
funnel.
10
2. Remove the old
carbon filter. Be careful
when lifting out. A used
carbon filter is heavy.
5. Insert the carbon
filter into the top of
the funnel and allow to
slide in.
7. Replace the HEPA
filter that had been set
aside.
3. Take your filter slider
and roll into a spiral.
(supplied with purchase
of replacement carbon
and HEPA filters.)
6. Pull the filter slider
out allowing the carbon
to slide to the bottom
of purifier.