Related Manuals for Anova BIO300
Summary of Contents for Anova BIO300
- Page 1 INSTRUCTIONS AND USER MANUAL BIO300 Millasur, SL. Rúa Eduardo Pondal, nº 23 - Pol. Ind. Sigüeiro 15688 - Oroso - A Coruña - 981 696 465 www.millasur.com...
- Page 2 ANOVA wishes to congratulate you for choosing one of our products and guarantees the assistance and cooperation that has always distinguished our brand over time. This machine is designed to last for many years and to be of great use if used in accordance with the instructions contained in the user manual.
-
Page 3: Table Of Contents
Contents 1. Safety instructions 2. Technical data 3. Machine parts 4. Commissioning 5. Maintenance 6. Troubleshooting 7. Warranty 8. Environment 9. Exploded view 10. CE declaration of conformity... -
Page 4: Safety Instructions
1. Safety instructions Safety labels found on the equipment Caveat Read this safety and operating instructions manual before using the wood chipper. Familiarize yourself with the operating and service recommendations to ensure the best performance from your machine. We reserve the right to discontinue, change and improve its products at any time without notice or obligation to the purchaser. - Page 5 • Observe the direction of the discharge chute and, if necessary, observe the direction of the wind to prevent debris from being thrown onto the road or where it may affect other people. • Do not put any part of your body into the feed chute while the machine is running. •...
- Page 6 • If you spill gasoline, do not try to start the engine. Move machine away from spill area and avoid creating any sources of ignition until gas vapors have dissipated. Clean up spilled fuel to avoid a fire hazard and dispose of waste properly. •...
-
Page 7: Technical Data
Note: No list of warnings and precautions can be exhaustive. If situations occur that are not covered by this manual, the operator must apply common sense and operate the shredder safely. Contact dealers for help in your area. 2. Technical data Model BIO300 Engine 13HP / 15HP four stroke Energy Gasoline... -
Page 8: Commissioning
Automatic feed function handle By operating the handle, there are 3 functions of the feed roller: forward, reverse, grab. Blade Status Check By loosening these 4 bolts, you can open the chamber to check the condition of the blades and fans. - Page 9 manual). 3. Check the condition of the blades, make sure that the blades are not excessively worn and that the steering wheel is not blocked. 4. Check that the tank has enough hydraulic oil #46 (about 2/3 of the volume). 5.
-
Page 10: Maintenance
Wood chipping Note: The diameter of the woods and branches should not exceed 120mm. Caveat Do not put your hands into the intake duct when charging. This is a very unsafe method and could result in injury to your hands. Do not reach over or cross the rail while the wood chipper is running. -
Page 11: Troubleshooting
Engine service See the engine owner's manual for information on engine maintenance. All thebearingsparts of your chipper are sealed parts and must be well oiled to last the life of your machine with normal use. Remember to oil the rack and pinion as the entire rack and pinion must be oiled before each use. -
Page 12: Warranty
7. Warranty For this tool the company provides the end user - regardless of the obligations of the retailer resulting from the purchase contract - with the following guarantees: The warranty period is 24 months from the delivery of the device which must be approved by the original purchase document. -
Page 13: Exploded View
9. Exploded view BIO300... -
Page 14: Ce Declaration Of Conformity
In the event that the machine is modified and this modification is not approved by the manufacturer and communicated to the distributor, this declaration will lose its value and validity. Name of the machine: BIO-SHREDDER Model: BIO300 Recognized and approved standard to which it conforms: directive2006/42/EC 2014/30/EU...
Need help?
Do you have a question about the BIO300 and is the answer not in the manual?
Questions and answers