Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for YANGZI YZ-S5
Summary of Contents for YANGZI YZ-S5
- Page 1 YZ-S5 Floor Sweeper operation instructions...
- Page 2 YZ-S5 Yangzi.Make cleaning easier...
-
Page 3: Table Of Contents
YZ-S5 Content Content......................1 Parts......................2 Performance parameters................2 Chapter 1 Description.................. 3 1.1 Content and Purpose................3 1.2 General Instructions................3 1.3 Safety requirements for batteries............4 1.4 General safety regulations..............4 Chapter 2 Use of the Machine..............4 2.1 Buttons/pedals of the machine...............4 2.1.1 The core control keys of the machine......... -
Page 4: Parts
YZ-S5 Parts ① Seat ⑥ Dust suppression nozzle ⑪ Dust box ② Steering wheel ⑦ Left brush ⑫ Water tank ③ Center control panel ⑧ Tire ⑬ Brake pedal ④ Leather lift pedal ⑨ Warning light ⑭ Accelerator pedal ⑤ Headlights ⑩... -
Page 5: Chapter 1 Description
YZ-S5 Chapter 1 Description 1.1 Content and Purpose The following content points out potentially hazardous situations, please read these instructions carefully and take necessary precautions. The essence of this machine operator's manual is to prevent injuries, and most accidents are caused at work by not heeding basic safety rules. -
Page 6: Safety Requirements For Batteries
YZ-S5 ●Even if the machine is to be dismantled and scrapped, someone should be there to pay attention. Because some harmful substances (such as batteries, waste oil, etc.) have met the standards, they should be sent to a specific center for processing. - Page 7 YZ-S5 pay attention: (1) The sweeping button is divided into three gears: The main brush, side brush and fan in the front block can be started with one key, and the main brush and the side brush are automatically lowered, and the cleaning operation can be performed;...
-
Page 8: The Operation Process Of The Machine
YZ-S5 ●Unscrew the cover of the water tank before using the machine, and pour clean clean water into the water tank.Water, pay attention to the water quality to be clean to prevent clogging of the waterway. 2.2 The operation process of the machine before start ●... -
Page 9: Precautions For Machine Operation
YZ-S5 3.3 Precautions for machine operation ●Avoid stopping the machine and rolling the brush in the same place for a long time; this will leave unnecessary marks on the ground. ●If you need to collect large light garbage, you can lift the front cover by stepping on the pedal to allow the large light garbage to pass through the machine. -
Page 10: Chapter 3 Routine Maintenance And Replacement Of Wearing Parts
YZ-S5 ●Press the dust vibrating button to vibrate the filter. ●Empty the trash ●Remove the key from the power switch. ●When the machine stops working, the brush must be lifted to prevent the brush from being deformed. Machine storage and maintenance ●If the machine will not be used within 30 days, store the machine in a clean and dry... - Page 11 YZ-S5 ●Open the right side panel of the machine, use an open-end wrench to remove the rocker arm of the main brush, the cover plate and the fixing nut of the fender bracket; ● Pull out the worn main brush, replace the new main brush, install the sealing plate nut first, then install the fender support nut, and finally install the rocker arm nut;...
- Page 12 YZ-S5 ! ! Hint The waste bin is inserted into the slot, and the sealing strip on the waste bin should be tightly fitted with the machine. If it doesn't fit, loosen the lock and reinsert it. 3.5 Battery Maintenance The power system of this sweeper is powered by four 12V maintenance-free lead-acid batteries in series, and the system voltage is 48V.
-
Page 13: Chapter 4 Sweeper Troubleshooting
YZ-S5 Unscrew the upper screw cap of the filter, take out the filter screen inside, and clean it with clean water. 3.7 Replacing the dust filter Open the machine case as shown on the right, unscrew the mounting screws of the dust... - Page 14 YZ-S5 Fan motor burned out Replace the fan motor DC contactor burned out Replacing the DC Contactor Wait 5-10 minutes, after the motor cools down, you can reset the start Motor thermal overload start Main brush, side brush, fan DC contactor burned out...
-
Page 15: Chapter 5 Maintenance
YZ-S5 Chapter 5 Maintenance Machine life and operational safety must be ensured by proper and routine maintenance of the machine. The routine maintenance requirements are tabulated below. Under suitable operating conditions, the maintenance interval can be changed and must be determined by the professional responsible for the maintenance. -
Page 16: Chapter 6 Battery Maintenance Guide
YZ-S5 Warranty is not covered under the following conditions of use: ● Failure to perform maintenance in accordance with the maintenance manual may result in mechanical damage or failure. ●The mechanical appearance or structure is obviously damaged due to improper operation. -
Page 17: Warranty Card
YZ-S5 Warranty card Name Tell Postal address Bill No Purchase time Number Product model Date Replace Fault description Warranty Conditions 1. Within the day when the user purchases this product, the motor is guaranteed for one year (more than 7 days from the date of purchase, no replacement, only warranty);... - Page 18 YZ-S5...
Need help?
Do you have a question about the YZ-S5 and is the answer not in the manual?
Questions and answers