Advertisement
Putting your baby in:
The Facing-In Position
The facing-in position is a perfect way to keep your baby cuddled against you and
provide the close contact and attention babies need. The wrap-around head support
cradles baby's head and neck. The facing in position helps in parent baby bonding as
you can play, talk and make eye-contact with the baby in this position.
Step 1:
Insert the back hard supporter (PE board) into the hole of the
front piece and close the Velcro.
Step 2:
Put the baby carrier on a safe surface and lay the baby on it. Wrap
the front piece on the baby's tummy (like a wrap diaper).
Step 3:
Fasten the head support buckle. Make sure the baby's arms go
through the arm holes.
Step 4:
Connect both sides of waist buckle on the baby's tummy until
you hear a "click" sound which indicates the straps are securely
fastened. Tighten the straps for comfort. (The male buckle must
go through the elastic band. The band will hold the extra portion
of the strap).
3
Step 5:
Fasten the shoulder strap buckle.
Step 6:
Bend your body forward to put both the shoulder straps on your
shoulders. (At this stage the baby should remain on the safe
surface).
Step 7:
Bring both hands behind your back and reach the back strap
buckles and fasten the buckle behind your back. (Take help from
someone else for this step if you need).
Step 8:
Securely hug the baby (with his/her face towards you) close to
your chest and make sure the baby's bottom is in the center of
the carrier.
Step 9:
Adjust the length of the shoulder straps and tighten for comfort.
4
Advertisement
