Advertisement
ASSEMBLY
1. Lay the crate flat on the floor. Release the two side clips used to keep the crate in the
folded position.
Gently pull the front and back panels of the crate to the vertical position.
2. Stand to one side of the crate. Reach inside to grasp the two-piece top bar with both
hands. Gradually pull the two bars upward so that they join each other.
3. Slide the locking sleeve over the connection until it is fully extended and the frame is
rigid. Repeat the same process for the other side.
Note:
Be careful not to pinch your hands when sliding the locking sleeve.
4. Roll up the mesh cover and fasten with the hook and loop strip.
Advertisement
