Table of Contents
Advertisement
Quick Links
AM Manufacturing Company
MODEL:
© 2015
R900RT
THE AM MANUFACTURING
MODEL: R900RT
OPERATIONS & SAFETY MANUAL
INCLUDING PARTS CATALOG AND MAINTENANCE INSTRUCTIONS
PROJECT NUMBER: 365
AM Assembly #: R900RT-CURRENT
SERIAL #: ___________
CAUTION:
DO NOT OPERATE, CLEAN, OR SERVICE THIS MACHINE BEFORE YOU READ THIS MANUAL AND ARE
FAMILIAR WITH THE SAFETY INSTRUCTIONS IN THIS MANUAL AND THOSE ON THE LABELS ON THE
MACHINE. KEEP THIS MANUAL AND OTHER MATERIALS DELIVERED WITH THE MACHINE, ACCESSIBLE TO
THE OPERATORS FOR EASY REFERENCE DURING USE.
THE ENTIRE CONTENTS OF THIS
PUBLICATION ARE COPYWRITTEN AND ALL
RIGHTS ARE RESERVED. REPRODUCTION
IN WHOLE OR IN PART IS PROHIBITED
WITHOUT WRITTEN NOTICE PERMISSION
OF AM MFG. INC.
IF YOU SHOULD HAVE ANY (?)
QUESTIONS ABOUT GUARDS OR
PLACEMENT CALL (800) 342-6744.
MANUFACTURING COMPANY
DIVISION OF THE ATWOOD CORPORATION
9200 CALUMET AVE. SUITE NW 07 MUNSTER, IN 46321
(219) 474-7272 (800) 342-6744 FAX: (219) 472-7271 www.ammfg.com
R900RT
© COPYRIGHT 2015
1 of 23
Original Release 2015
Advertisement
Table of Contents
Related Manuals for AM MANUFACTURING R900RT
Summary of Contents for AM MANUFACTURING R900RT
- Page 1 MODEL: R900RT OPERATIONS & SAFETY MANUAL INCLUDING PARTS CATALOG AND MAINTENANCE INSTRUCTIONS PROJECT NUMBER: 365 AM Assembly #: R900RT-CURRENT SERIAL #: ___________ CAUTION: DO NOT OPERATE, CLEAN, OR SERVICE THIS MACHINE BEFORE YOU READ THIS MANUAL AND ARE FAMILIAR WITH THE SAFETY INSTRUCTIONS IN THIS MANUAL AND THOSE ON THE LABELS ON THE MACHINE.
- Page 2 AM Manufacturing Company MODEL: © 2015 R900RT OWNERS RESPONSIBILITY NOTE: THE PARTS AND EQUIPMENT DESCRIBED IN THIS MANUAL MAY BE COVERED BY ONE OR MORE U.S. AND FOREIGN PENDING PATENTS. TO MAINTAIN MACHINE AND USER SAFETY, THE RESPONSIBILITY OF THE OWNER...
-
Page 3: Table Of Contents
20-22 ORDERING REPLACEMENT PARTS…………………………………………………………… NOTES………………………………………………………………………………………………. IMPORTANT: AM MANUFACTURING Co. RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN, SPECIFICATIONS OR MANUFACTURING. TO IMPROVE THEIR PRODUCTS WITHOUT NOTICE AND WITHOUT OBLIGATION TO CHANGE OR IMPROVE PREVIOUSLY BUILT PRODUCTS, INCLUDING MANUALS AND CATALOGS. - Page 4 FOLLOW INSTRUCTIONS DURING USE INTRODUCTION YOUR R900RT DOUGH ROUNDER HAS BEEN BUILT WITH THE BUSY BAKER IN MIND. IT’S VERSATILITY AND SIMPLICITY IS UNMATCHED IN THE INDUSTRY. PRODUCTION DEPENDS ON THE DESIRED DOUGH BALL SIZE AND HOW FAST THE DIVIDED DOUGH PIECES ARE DROPPED INTO THE FUNNEL. SMALL PIECES CAN BE FED APPROXIMATELY TWO PER SECOND, WHEREAS LARGER DOUGH PIECES (UP TO 2 lbs.) MUST BE...
-
Page 5: Safety Signal Words
AM Manufacturing Company MODEL: © 2015 R900RT SAFETY SIGNAL WORDS THIS MACHINE IS DESIGNED TO PROVIDE FOR SAFE OPERATION IF NORMAL OPERATING PROCEDURES AND SAFETY MESSAGES LOCATED ON THE MACHINE AND IN THIS MANUAL ARE FOLLOWED. THIS IS A SAFETY ALERT SYMBOL. YOU WILL FIND IT ON... -
Page 6: Warning Labels
AM Manufacturing Company MODEL: © 2015 R900RT WARNING LABELS TYPICALLY FOUND ON THE R900RT 1 AMTAG160SF: TOP OF CABINET 3 TAG5M: UPPER RIGHT CORNER CABINET 4 AMTAG10AMF: UPPER RIGHT CORNER CABINET AMTAG10ASF: INSIDE CABINET ON ELECTRICAL BOX 2 TAG21M: BELOW ELECTRICAL... -
Page 7: Safety Rules
PERFORMED, OR IF THE MACHINE IS OUT OF SERVICE. NEVER LEAVE THIS MACHINE RUNNING UNATTENDED. IMPORTANT: IF YOU HAVE ANY QUESTIONS ABOUT THESE SAFETY RULES, SEE YOUR SUPERVISOR OR CALL AM MANUFACTURING Co. TOLL FREE: (800) 342-6744 R900RT © COPYRIGHT 2015 7 of 23 Original Release 2015... - Page 8 ELECTRICIAN OPERATING THE R900RT THE R900RT IS READY TO ROUND AFTER: A. POSITION R900RT IN THE DESIRED LOCATION AND SET THE TWO (2) LOCKING CASTERS. B. PLUG THE POWER CORD INTO PROPER RECEPTACLE. C. CHECK FOR PROPER ROTATION OF ROUNDING DRUM, REFER TO PRELIMINARY START - UP PROCEDURE.
-
Page 9: Cleaning Instructions
R900RT CLEANING INSTRUCTIONS ALL AM MANUFACTURING MACHINES ARE TESTED WITH DOUGH DURING THE IN - HOUSE, RUN - IN AND QUALITY AUDIT PROCEDURE. ALTHOUGH THE MACHINE HAS BEEN CLEANED, SOME EVIDENCE OF DOUGH ON AND IN THE MACHINE MAY BE DETECTED, THIS IS NORMAL. -
Page 10: General Maintenance Guide
REPLACE ANY DAMAGED OR MISSING SAFETY LABELS. THEY ARE AVAILABLE FROM THE MANUFACTURER. MAINTENANCE FOR THE R900RT ALWAYS BEGINS WITH KEEPING THE MACHINE CLEAN. PROPER CLEANING PROCEDURES CAN BE FOUND ON PAGE (9) OF THIS MANUAL. STANDARD LONG TERM MAINTENANCE CONSISTS OF LUBRICATING MAIN WEAR POINTS. -
Page 11: Cabinet Assembly
AM Manufacturing Company MODEL: © 2015 R900RT CABINET ASSEMBLY R900RT © COPYRIGHT 2015 11 of 23 Original Release 2015... - Page 12 AM Manufacturing Company MODEL: © 2015 R900RT CABINET ASSEMBLY BILL OF MATERIAL ITEM PART NO DESCRIPTION F0402HHCS HEX HEAD CAP SCREW, 1/4-20 X 1/2" L F0400FW FLAT WASHER, 1/4" F0400LW LOCK WASHER, 1/4" F9725PHS PAN HEAD, SLOTTED, 8-32 UNC x 0.375...
-
Page 13: Rounder Assembly
AM Manufacturing Company MODEL: © 2015 R900RT ROUNDER ASSEMBLY OLD STYLE DRUM ONLY R900RT © COPYRIGHT 2015 13 of 23 Original Release 2015... - Page 14 AM Manufacturing Company MODEL: © 2015 R900RT ROUNDER ASSEMBLY BILL OF MATERIAL ITEM PART NO DESCRIPTION R130RA2 OUTSIDE FRAME WELDED TO ITEM #1 SHOWN APART FOR CLEARTY R144RA MOTOR ADJUSTING BRACKET R141RA PLASTIC SEAL RING R109RA ROUNDER BASE SPROCKET R134RA...
-
Page 15: Electrical Components Single Phase
AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL COMPONENTS SINGLE PHASE R900RT © COPYRIGHT 2015 15 of 23 Original Release 2015... - Page 16 AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL COMPONENTS SINGLE PHASE BOM ITEM PART NO DESCRIPTION SS255-115 GEAR MOTOR ASSEMBLY (110-120Vac MACHINE) SS255 - GEAR MOTOR SS255-115 SS220 - 14/3 CAROLPRENE CORD 18" SS100 – CORD CONNECTOR SS153 - PLUG (110-120Vac)
-
Page 17: Electrical Components Three Phase
AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL COMPONENTS THREE PHASE R900RT © COPYRIGHT 2015 17 of 23 Original Release 2015... - Page 18 AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL COMPONENTS THREE PHASE BOM ITEM PART NO DESCRIPTION GEAR MOTOR ASSEMBLY (208-240Vac MACHINE) SS256 - 1HP GEAR MOTOR SS256-220 SS225 - 16/4 CAROLPRENE CORD 18" SS100 – CORD CONNECTOR SS159 - PLUG (208-240Vac)
-
Page 19: Electrical Schematic
AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL SCHEMATIC SINGLE PHASE R900RT © COPYRIGHT 2015 19 of 23 Original Release 2015... - Page 20 AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL SCHEMATIC 208-240Vac - 3 PHASE R900RT © COPYRIGHT 2015 20 of 23 Original Release 2015...
- Page 21 AM Manufacturing Company MODEL: © 2015 R900RT ELECTRICAL SCHEMATIC 460-480Vac - 3 PHASE R900RT © COPYRIGHT 2015 21 of 23 Original Release 2015...
-
Page 22: Ordering Replacement Parts
2) COMPARE THE LIST WITH THE PARTS DIAGRAMS SUPPLIED. 3) RECORD THE COMPLETE MODEL AND SERIAL NUMBER OF THE UNIT. 4) CALL AM MANUFACTURING (800) 342-6744 AND PROVIDE ALL INFORMATION NOTED ABOVE TO EXPEDITE ORDER PROCESSING AND HELP REDUCE SHIPPING COST. -
Page 23: Notes
AM Manufacturing Company MODEL: © 2015 R900RT NOTES DATE: ACTIVITY: R900RT © COPYRIGHT 2015 23 of 23 Original Release 2015...
Need help?
Do you have a question about the R900RT and is the answer not in the manual?
Questions and answers