Advertisement
Quick Links
Falc - cod. 2023 02/19 – Inglese -
USE AND MAINTENANCE MANUAL
1.1. Manufacturer:
: PELLICANO – MASTER SHREDDER
1.2. Series
1.3. Model:
1.4. Series number:
CAREFULLY NOTE:
•
THIS MANUAL MUST ACCOMPANY EACH EXAMPLE OF THE ABOVE MENTIONED SERIES.
•
IN ORDER TO ENSURE A COMPLETE UNDERSTANDING OF THE MACHINE'S CORRECT
FUNCTIONING THE USER MUST FULLY READ EACH SECTION OF THE MANUAL.
•
PARTICULARLY IMPORTANT NOTES REGARDING SAFETY ARE WRITTEN IN BOLD PRINT.
•
ANY USERS WHO MUST CARRY OUT PARTICULAR OPERATIONS ON THE MACHINE FOR
WHICH NO SPECIFIC INSTRUCTIONS HAVE BEEN SUPPLIED MUST DIRECTLY ASK OUR SALES
OR TECHNICAL OFFICE.
INDEX
1.
General indications
2.
Use conditions
3.
Operator conditions
4.1. Connection of the shredders to tractor
4.2. Shredders use
4.3. Rear cover
4.4. Detaching the shredders from the tractor
4.5. Transport
4.6. Work height adjustment
4.7. Maintenance and repairs
5.
Guarantee
6.
Norms to follow for correctly ordering spare parts
7.
Safety pictograms
FALC S.r.l.
via Proventa n.41 - Faenza (Ravenna) - ITALIA -
Tel. +39 0546 29050
Fax +39 0546 663986
e-mail: info@falc.eu
http: www.falc.eu
1
Advertisement
Summary of Contents for FALC PELLICANO
- Page 1 Falc - cod. 2023 02/19 – Inglese - USE AND MAINTENANCE MANUAL 1.1. Manufacturer: FALC S.r.l. via Proventa n.41 - Faenza (Ravenna) - ITALIA - Tel. +39 0546 29050 Fax +39 0546 663986 e-mail: info@falc.eu http: www.falc.eu : PELLICANO – MASTER SHREDDER 1.2.
-
Page 2: Use Conditions
Falc - cod. 2023 02/19 – Inglese - 2. USE CONDITIONS The Pellicano and Master serie shredders are manufactured to be combined with a suitable tractor equipped with 3 point linkage and driven by a cardan shaft. - Page 3 Falc - cod. 2023 02/19 – Inglese - Model Weight Pellicano 1600 Special mm 1680 mm 800 mm 880 mm 2260 kg 600 Pellicano 1800 Special mm 1820 mm 800 mm 1020 mm 2400 kg 620 Pellicano 2100 Special mm.2100...
- Page 4 Falc - cod. 2023 02/19 – Inglese - Model Weight Pellicano / Master 1600 mm 1600 mm 800 mm 800 mm 2180 kg 750 Pellicano / Master 1800 mm 1780 mm 800 mm 980 mm 2360 kg 790 Pellicano / Master 2100...
- Page 5 Falc - cod. 2023 02/19 – Inglese - The Pellicano and Master series shredders are particularly recommended for the shredding of bushes, branches, grass and reeds along street banks, canal and well edges in the breakflame band and underneath electrical cables. They are further recommended for the shredding of grass and pruning in fruit, vineyard, olive and citrus cultivation.
- Page 6 A safety system guarantees the withdrawal of the shredder and a return to automatic in the presence of obstacles. MINIMUM Power, Weight and Size of the tractors on which the Pellicano and Master shredders are to be applied: Tractor weight...
- Page 7 Falc - cod. 2023 02/19 – Inglese - a) The operator must remain at the tractor driving seat when using the shredder. The operator must not leave the tractor driving seat if the tractor’s power take-off has not been removed and if the shredders moving parts (rotors etc) have not come to a complete standstill.
-
Page 8: Using The Shredder
Falc - cod. 2023 02/19 – Inglese - a) All Falc shredders may be applied to all types of tractors provided that they are equipped with a universal 3 point linkage (see MINIMUM Power, Weight and Size of tractors). b) The shredder must be positioned level and in a stable position on the supporting leg. - Page 9 Falc - cod. 2023 02/19 – Inglese - After having correctly attached the shredder to the tractor the operator may begin work always respecting the conditions in point 3 (point 4.3. if working with the hood open). Carefully check that the safety pins for transport which impede any movement by the shredder have been removed.
- Page 10 Falc - cod. 2023 02/19 – Inglese - a) Stop the tractor level, use the hand brake and disconnect the power take-off. b) Rest the shredder on the ground so that the rear roller is in a stable and horizontal position.
-
Page 11: Maintenance And Repairs
Falc - cod. 2023 02/19 – Inglese - Always use equipment appropriate to the weight of the machine itself for any handling rendered necessary by loading, unloading and storing and use the grips positioned on the machine. A= safety pin for the transport B= attachment points for lifting the machine 4.6. - Page 12 - Lubricate the cardan joint (see the instruction book specifically relevant to the cardan) ATTENTION : usually the cardan joint is supplied by Falc and it is suitable for the effective power necessary for the tractor-shredder coupling. In case of replacement never use a cardan joint with less features than the original.
- Page 13 Replace all of the belts with new ones. Carefully check to see that the new belts are the same as the old ones with regards to length and type. Falc uses SPB type teethed belts on the series’ machines.
- Page 14 Falc - cod. 2023 02/19 – Inglese - 4.7.3. Disassembly and reassembly of the pulleys The pulleys are fixed on the relative shafts using a taper bush similar to that shown in the figure. a) To disassemble the pulleys proceed as follows : Use a suitable key to loosen the screws (A) Remove n.
- Page 15 Falc - cod. 2023 02/19 – Inglese - 4.7.4. Causes of possible inconveniences and relative interventions If the shredder is obviously vibrating CAUSE : INTERVENTIONS : One or more of the knives (hammers) are broken Replace the broken knives (hammers) and those which provokes an imbalance in the rotor.
- Page 16 The partial or whole reproduction of this manual is prohibited as is copying or disclosure of its contents without the express written authorisation of Falc. Falc reserves the right to carry out any modifications on the machine deemed to be necessary at any time without each time updating this publication.