Advertisement
Quick Links
Advertisement
Summary of Contents for Laser 8073
- Page 1 Part No. 8073 Cordless Polisher 20V w/o Battery Instructions www.lasertools.co.uk...
- Page 2 Introduction This cordless polisher is part of the Laser professional workshop ‘one battery powers all’ cordless tool range with brushless motor technology designed and built for daily use. Cordless power is fast becoming the experts’ choice over mains and pneumatic, bringing extra safety to the workforce environment.
- Page 3 Components Ref. Description Spindle lock button “D” handle Speed controller On / OFF trigger On / OFF safety lock Battery Battery release button Polishing pad Operation: www.lasertools.co.uk...
-
Page 4: Specifications
Instructions Specifications Voltage Speeds 800-2400 RPM Disc diameter 180mm (7.0") Spindle thread size Tested vibration emission value 1.84m/s2 Noise 78 dB Weight (no battery, no pad) 2.1kg ≧ 40mins Weight (with battery) 2.78kg Working time “D” handle fitment: DO NOT USE the tool without fitting the “D” handle. Refer to Figure 2: before fitting, or changing direction of the handle (right or left-handed use), always remove the battery. - Page 5 Instructions Fitting a polishing pad: WARNING: Remove battery pack before fitting or removing polishing pads. • Refer to Figure 1: Press spindle lock button to lock gearbox (1). • Screw on the polishing pad (M14 thread). If necessary, the spindle can also be held steady by using a flat 17mm spanner.
- Page 6 Instructions Speed Controller: • The tool speed can be changed by rotating the speed controller from its lowest setting (800 RPM) to its highest setting (2400 RPM). Any speed can be set between these two figures. • To decrease the speed, rotate the speed controller backwards. •...
- Page 7 Safety Warnings - please read • Ensure that all operators have read and understood these instructions. • Wear approved PPE: eye protection, ear defenders, gloves and protective clothing. If the polishing generates dust, wear a particle mask. • Ensure no loose clothing, ties, watches, jewellery, etc. Contain long hair. •...
- Page 8 Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools.