Yli Electronic YBC-431 Quick Start Manual

Bluetooth Controller
Model: YBC-431
Specification
Dimensions: 76x47x26(mm)
Operating Voltage: 9V-28V
Current Consumption: 12V 130mA
Connection Distance : ≤10m
Connection mode: Bluetooth
Acoustic-optic Indicator
Power on DC(9V-28V)—3S Operating indicator lights up(Green Light) B l u e t o o t h start normally.
Key reset operation: Keep pressing the button—operating indicator light flashing(green light),reset indicator
lights up(red light)—release the button after the operating indicator light goes off, reset indicator light(red
light) goes off—reset operation complete, wait for the lock start automatically, operating indicator light (green
light) long light.
This operation also known as clear data(restore factory defaults). Don't press this button easily, please
note!
The diagram is the skipping stitch to chose delay time :
APP Operation
Step 1: Chose the User type
The first time to download the APP for entering, need to choose the user type (there are three types).
1.Primary administrator, can only have one, it can control all the function of lock, include(change password, change
name of bluetooth, add or delete administrators and normal users, unlocking).
2. Administrator : can have multiple administrators, the function include(Add or delete other administrators
and normal users, unlocking).
3. User: can have multiple users, only have unlocking function.
Step 2: Connect with Lock
Then enter into the unlock interface, also known as main interface, this moment will
scan locks.
Note: the upper left corner is lock connection status indicator, red displays
not connected, green display connected.
Waiting for several minutes, the device has been scanned, click the device begin to connect, then remind
connection successful, in addition, the lock connection status indicator on the upper left corner is green,
shows connected.
R
EMC
tested
Germany
Operating Humidity: 10%-90%
Relay Output: 30V DC;1A
Storage Capacity: 255 Users
Open mode: APP unlock
Weight: 0.09 kg
—
Master administrator
Administrators
Ordinary user
Note: This moment should click [More] [Registration] to fill in your registration information.
Step3: Fill in the registration information. and start authentication requests.
Click [More] and chose the first item [Registration] primary administrator registered interface: Enter into
registered interface, you can find three items:
1. Shows the current type of user( you can see it is primary administrator).
2. Fill in your name.
3. Fill in the password, means primary administrator password, when you complete all information, please
click "save".
Note: Name up to three characters, or ten letters, the password must be
six digital code, if this lock has not been connected and authorized by other
master administrators(mean new lock)or just delete all data, the name and
password can be set at random, otherwise must according to the last settings
to fill in.
Administrator and other normal users registered interface:
Enter into registered interface, you can find two items:
1.Shows the current type of user( you can see it is primary administrator)
2.Fill in your name and all necessary information ,then click "Save"
N o t e : N a m e u p t o t h r e e c h a r a c t e r s , o r t e n l e t t e r s , m u s t a c c o r d i n g t o t h e s e t t i n g s t h a t p r i m a r y
a d m i n i s t r a t o r a n d a d m i n i s t r a t o r s p r o v i d e y o u .
When Registered displayed,means completed to fill in, you can return to [More]
authentication.
Note: this moment if not registered successful, you can the a edit button on the top right corner, if you find
any information fill in error, you can click edit to reset.
R e t u r n t o m a i n i n t e r f a c e y o u c a n s e e t h a t i s l a u n c h i n g authentication(start authentication will need the
registration information, if without registration information, it'll not start authentication).
Note: If this moment don't start authentication, you can check the lock connection indicator on the
top left corner is green or not, if it's red, you can press the "Home"button on you mobile-phone,and click
the APP icon again, enter in APP, APP will reconnect the lock ,and start authentication.
If you registration information is correct, please wait for several minutes, it'll remind you the authentication is
successful, if fail, please check your information is correct or not, or whether has connected the corresponding
lock.
Step 4: Unlocking
Sliding button, if change into green means unlock successfully, after this moment, due to there is a time interval,
during this time interval you can't operate the unlocking again, so must wait for the lock closed and the unlocking
icon slide back to left ,change into Red, you can operate the unlocking again.
After the the lock closed, and the unlocking icon slide back to left, change into red, you can operate the unlocking
again.
The above is the common function of primary administrator, administrators, and normal users(authentication
and unlocking)
The below is the special common function of primary administrator and administrators.
Step 5: System administrator
5-1:Query data
Permission:
Master administrator
Name:
Password:
[Home], start