Advertisement

Wedo 2000 Manual

Power supply

4 x 1,5 V AA Mignon batteries or WEDO mains adaptor (Prod.-No. 50 556) .

  1. Open battery compartment at the bottom of the scale and insert batteries as indicated.
  2. Connect mains adaptor to the input socket at the rear of the scale and plug into mains supply.

Installation of scale – precautions

To obtain precise weighing, place the scale on a firm level surface. Avoid vibrating base, or direct sunlight, moisture and dusty environ- ments. Ideal room temperature between 10°C and 30°C.

Operating the scale

ON / OFF / TARE

Press the key. „8.8.8.8" appears on the display followed by „0".

Switching-off the scale

ON / OFF / TARE

Touching the Off key for approx. 4 sec. will switch the scale off.
Note: When using batteries the scale automatically shuts off after approx. 2 min. of non-use.

Tare Function

ON / OFF / TARE

Switch the scale off. Place container onto the weighing platform. Switch the scale on – scale displays......„0"
Place item A into the container – scale displays weight of item A.
Press key – scale displays......................„0"
Place item B into the container – scale displays weight of item B.
Press key again – scale displays..................„0"
The above procedure can be repeated until the capacity of the scale is exceeded.
Note: When container and items are removed from the platform the scale displays a negative weight. For further weighing procedures press key – scale displays......„0"

Error messages

„Lo" Batteries need replacing or have been inserted incorrectly

„E" Max. weighing capacity is exceeded

„-XXXX" Switch the scale off and then on again

Guarantee

The scale comes complete with a full 3 years guarantee from date of purchase for faulty workmanship or material. In the unlikely event that it is necessary to return the scale for attention to your supplier, please retain the original packing. Important: Please attach receipt / invoice of purchase. Exclusions to the guarantee include the batteries, damage caused through negligence or force. The use of non-leakproof batte- ries will invalidate the guarantee.
Today furniture is coated with various varnishes and polishes which may not be compatible with the rubber feet of the scale. It is advisable to use a pad beneath the scale as we cannot be held liable for any damage which may occur.

Cleaning

Clean with a damp cloth or a little glass-cleaner, do not use any ag- gressive or abrasive clean-ing agents. Prevent the entry of water.

Batteries must not be disposed of as household waste. As a consumer you are legally obliged to return used batteries. You can dispose of old batteries at public collection points, or any-where batteries of the relevant type are sold.

Technical specifications WEDO 2000
Capacity: 2 kg
Graduation: 1 g
Min. weighing capacity: 3 g
Weight of scale: 720 g
Size of scale: 205 x 170 x 42 mm
Size of platform: 160 x 153 mm
Prod.-No.: 50 2000

This device corresponds to the EC regulation EMV 2014/30/EU
Note: Please do not use the scale in the immediate vicinity of strong emittors such as transmitting sets or microwave ovens. Switch these devices off before weighing. Otherwise you might receive a distorted weighing result.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Wedo 2000 Manual

Advertisement

Need Assistance?

Do you have a question about the 2000 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents