Panasonic VIERA TH-46PZ850U Operating Instructions Manual page 7

■
Assembling the pedestal
Fix securely with assembly screws
Tighten screws firmly.
View from above
When this hole is aligned with
the center of the groove, the
pedestal will be positioned at
the center of its rotation.
■
Set-up
Carry out work on a horizontal and level surface.
Align the pedestal with its center of rotation, referring to
"Assembling the pedestal,"
Tighten screws firmly.
B
Arrow
mark
Pole
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or damaged.
If you use the pedestal when it is damaged, personal injury may result. Contact your nearest Panasonic Dealer
immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Attaching the pedestal to TV
A . (Total 4 screws)
A
Pole
R
Bottom view
Rear side
Hole for pedestal
installation
Pole
Fix securely with assembly screws
(Total 4 screws)
Base
Assembly screws
(4 of each)
A
L
Pole
B
Front
Poles (2)
Base
L
bottom of the poles.
Base (1)
B
Accessories
M5 x 18 (Silver)
M5 x 25 (Black)
L
R
or R is printed at the
.
7