FEATURES • Dual tracks 1 and 2 • Built-in decoder • Built-in dual output interface: • Keyboard wedge • RS232C (optional) • Bi-directional operation • Auto recognition of different computer models: ( XT, AT, PS/2 Model 25, PS/2 Model 50 and up ),* and all compatible clones •...
1. Magnetic stripe reader, pre-assembled 2. 5VDC Power adapter 3. User’s Manual INSTALLATION Your magnetic stripe reader was pre-assembled for easy installation. MR3000 1. Connect the male DIN 5 connector to the keyboard port of the computer. 2. Connect the female DIN 5 connector to the system keyboard or POS keyboard.
FUNCTIONAL TEST MR3000 To functionally test the MR3000 will require the use of a standard credit card. Place the credit card at one end of the Magnetic Stripe Reader. Face the magnetic strip of the credit card toward the arrow of the MSR.
INTERFACE MR3000 The MR3000 interfaces with the keyboard port of the computer. Two DIN5 connectors are provided to connect the MSR between the computer’s key- board port and another keyboard peripheral (101 keyboard). DI N 5 M al e NOTE: The electronics contained within the MR3000 will allow the computer to boot up without the 101 keyboard being attached.
HARDWARE CONFIGURATION The MR3000/MR3000RS can be configured with different options. The MR3000 has the ability to transmit data a three different rates. The MR3000RS protocol can be set to most popular RS232C configurations. WARNING: If the user opens the magnetic stripe reader to make jumper changes all product warranties will be voided.