Advertisement
Assembling Your Coffee Grinder
1.
Place the Coffee Grinder on a flat, level surface.
2.
Insert the Burr Disc Holder into the Bean Container then secure it in place
by turning counterclockwise until hit stops.
3.
Ensure the Dial on the Protection Cap is in the unlock position. Rest the
large circle over the Burr Disc Holder then line up the Dial over the hole
in the receptacle of the Bean Container. Secure it in place by turning the
Protection Cap Dial clockwise until it stops.
4. Place the Bean Container Lid on top of the Bean Container.
5.
Place the Ground Storage Box Lid onto the Ground Storage Box.
6.
Insert the Ground Storage Box fully into the Housing.
7.
Plug the appliance into a 120VAC 60 Hz outlet only. Your Coffee Grinder
is now ready for use.
Using your Coffee Grinder
1.
Make sure the unit is unplugged.
2.
Remove the Bean Container Lid.
3.
Fill the Bean Container to the top, leaving enough room for the Bean
Container Lid to fully nest on top.
4. Ensure that the Ground Storage Box with Ground Storage Box Lid is fully
seated into the Housing.
5.
Plug the power cord into the outlet.
6.
Use the Fineness Lever located on the back of the unit to adjust the
fineness of the coffee grounds. The Fineness Lever can be adjusted from
1 for maximum grind coarseness to 12 for maximum grind fineness.
Note: Use coarse grind for percolator/French press; medium grind for
automatic drip and fine grind for espresso.
7.
Slide the Cup Selector to the desired number of cups: 2 - 12. You can make
adjustments based on personal preference by adjusting the cup selection
to make your coffee stronger or weaker.
8.
Press the START/STOP Button to begin grinding.
Note: The Coffee Grinder has a safety feature that prevents it from
operating without the Protection Cap properly installed in the Bean
Container and the assembled Ground Storage Box With Ground Storage
Lid fully seated into the Housing.
9.
Grinding will automatically stop upon completion.
10. To manually stop the operation, press the START/STOP Button once
and the unit will stop. To restart, press the START/STOP Button again,
or repeat steps 6 & 7 for different adjustments before pressing the
START/STOP Button to begin grinding.
11. Remove Ground Storage Box and use as desired.
8
Care and Cleaning
Always unplug Coffee Grinder before cleaning.
Do not immerse the Housing, cord or plug in water. Simply wipe the Housing
with a damp cloth.
Do not use abrasive cleaners or scouring pads on any part of the Coffee
Grinder.
All removable parts listed below are top rack dishwasher safe or can be
washed in warm soapy water. Rinse and dry thoroughly after each use.
Removable Parts List:
• Bean Container Lid
• Ground Storage Lid
• Ground Storage Container
• Burr Disc Holder
• Protection Cap
Store the Coffee Grinder in a safe location out of the reach of children.
Any other servicing should be performed by an authorized service
representative.
9
Advertisement
