Download Print this page

KMART 43181964 Assembly Instructions

Bike trailer

Download this manual

1.Open the frames

(Pic1)

4.Attach the wheels as pic2, and

instert the safety pin to ensure the

wheels are firmly engaged

(Pic1)

6.Install the cover with snaps and velcon closures around the hood, which marked with red arrows(pic2

and pic2-1), after that tighten the tie of pic3

Brake function: wrap

the strap around the

wheel then tighten the

D-ring to prevent the

slide

BIKE TRAILER

ASSEMBLY INSTRUCTIONS

(Pic1)

2.Insert the buckle as Pic2

(Pic2)

(Pic1)

5.Release the tow bar by removing the safety pin from

lower to upper hole, and fasten it with correct way

(Pic2-1)

Keycode:43181964

(Pic1)

3.Install the snap at the

bottom of the backrest as pic2

(Pic2)

(Pic3)

(Pic2)

Page 1 BIKE TRAILER ASSEMBLY INSTRUCTIONS Keycode:43181964 (Pic2) (Pic1) (Pic1) (Pic2) 1.Open the frames 2.Insert the buckle as Pic2 3.Install the snap at the bottom of the backrest as pic2 (Pic2) (Pic1) (Pic1) (Pic2) 4.Attach the wheels as pic2, and 5.Release the tow bar by removing the safety pin from...
Page 2 BICYCLE TRAILER MODE (Pic1) (Pic2) (Pic3) 7.Remove the safety pin,get the hitch(red arrow 2 of pic1), then tighten it on the left of bike’s rear wheel axle(pic2), insert flex connector of tow bar(pic3), aligned the holes,and insert the safety pin, finally wrap the strap around the Pls note:5-point harness buckle, adjustable, for two frame of bike twice and latch to the D-...