bitmore E-PRO POWER 10K User Manual page 4

Please note: When charging more than one device at the same time, the total combined output
is shared between each connected device. Therefore, charging times may take longer and
depending on the power level of the e-Pro Power 10K, you may not get a full charge
on each device.
Using the kickstand:
Carefully flick the kickstand out with your finger
Note: Do not cover the powerbank or your device during charging, remove any cases. Do not
place metal object on the charging area, keep out of reach of children. Ensure the coil on the
e-Pro Power Qi 10K and your device are correctly aligned.
Extra Safety Protection:
Over-discharge voltage
Over-charge voltage
Over-current
Short circuit
Over-heating
This powerbank has a fire-resistant coating to prevent malicious or accidental ignition.
INFO ABOUT POWERBANKS:
For best performance we recommend charging the device fully for 3-4 hours first or until all 4
LEDs are illuminated.
This powerbank o ers a 10,000mAh capacity – the battery capacity of the device you are
charging is dependent on the number of charges you can receive from this powerbank e.g. if your
device has a battery capacity of 3000mAh you should get 3 full charges (assuming you are not
using your device at the same time and it is in flight mode). If your device has a 1500mAh
capacity, you should get 6 full charges from the powerbank (assuming you are not using your
device at the same time, and it is in flight mode).
This powerbank is not suitable for devices that require a 5W charging input, Type C to Type C
charging or PD (power delivery) such as the Apple iPad Pro.
BM ECPB10QI E PRO POWER 10K 3