Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Studebaker SB5050
Summary of Contents for Studebaker SB5050
-
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. -
Page 3: Compliance With Fcc Regulations
Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. -
Page 4: Protect Your Furniture
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not touch the lens or poke at it. - Page 5 The serial number of this product is found on its bottom. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SB5050 Serial Number: CONTENTS OF YOUR PRODUCT Main Unit •...
-
Page 6: Location Of Controls
LOCATION OF CONTROLS LED DISPLAY REPEAT BUTTON SPEAKER CLK SET / MEM / PROG BUTTON CD COMPARTMENT / PAIR / BUTTON / TUN+ BUTTON WATCH HOLDER USB CHARGING PORT / TUN- BUTTON DC IN JACK STOP BUTTON CLOCK BACKUP BATTERIES AL2 / M+ BUTTON COMPARTMENT FM ANTENNA... - Page 7 Note: All buttons on the unit can also be operated by remote control. FM BUTTON BLUETOOTH BUTTON POWER BUTTON MUTE BUTTON CD BUTTON AUX IN BUTTON BT OUT BUTTON MEM+ / AL2 BUTTON REPEAT BUTTON MEM- / AL1 BUTTON EQ / SCAN BUTTON CD DOOR OPEN / CLOSE BUTTON CLK SET / MEM / PROG BUTTON TUN+ /...
- Page 8 Install / Remove Batteries of Remote Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (not included), referring to the polarity markings. Finally, replace the cover.
-
Page 9: Standby Mode
Battery Back-up system The unit is equipped with a battery back-up system. It requires 2 x ‘AAA’ (UM-4) batteries • (Not included). Open the battery door on the bottom of the unit. Insert the batteries into the CLOCK • BACKUP BATTERIES COMPARTMENT (#7) and make sure the positive and negative (+ or -) sides of the batteries are in contact with the corresponding terminals in the batteries compartment . -
Page 10: Setting The Clock
SETTING THE CLOCK The LED DISPLAY (#1) will flash when the unit is plugged in for the first time. The unit is now standby mode. Setting the Time: In standby mode, press and hold the CLOCK SET BUTTON (#17) until the hour digits of the clock display begin to flash. 2. - Page 11 7. Tap the ALARM 1 BUTTON (#23) to confirm the minute setting. The wake up option will flash on the LED DISPLAY (#1) to prompt for input. 8. Tap the BUTTON (#19) or BUTTON (#20) to select the wake up option (bb – alarm sound or rAd –...
-
Page 12: Snooze Function
Setting the alarms ON/OFF: 1. In Standby mode, press and hold the ALARM 1 BUTTON (#23). The Alarm 1 icon will light and the “OFF or ON” of alarm time will flash. Tap the BUTTON (#19) BUTTON (#20) repeatedly to select the Alarm “ON” or “OFF”. - Page 13 Set the radio presets: The unit allows you to store up to 20 for easy recall at any time. 1. Tap the POWER BUTTON (#12) to turn the unit on. 2. Tap SOURCE BUTTON (#11) repeatedly to select FM radio mode. 3.
- Page 14 7. While playing, press the PLAY/PAUSE BUTTON (#18) to pause, the play icon will flash on the LED DISPLAY (#1). Press PLAY/PAUSE BUTTON (#18) again to resume playing. 8. Tap VOLUME + / VOLUME - (#25) to the desired volume level. 9.
-
Page 15: Bluetooth Operation
4. Turn on the Bluetooth function of your device and enable the search or scan function to find the SB5050. 5. Select SB5050 from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) SB5050 with your device. -
Page 16: Auxiliary Input
6. Play music on SB5050 in CD or AUX mode, unit speaker sound will be off, you can listen to music by using your Bluetooth receiver such as a headphone or speaker wirelessly. -
Page 17: Sleep Operation
Note: Tap the SLEEP BUTTON (#14) once to check the remaining sleep time. WIRELESS CHARGING SB5050 support wireless charging Smart Phone and Apple Watch. Smart Phone 1. Place the smart phone (wireless charging compatible) on the charging pad in Horizontal position. -
Page 18: Usb Charging
CAUTION: Remove your phone from any metal or magnetic protective case before placing it on the • Charging Pad. Do not place any metal objects or magnetic-striped devices on the Charging Pads. Doing so could damage the object or this unit. Qi compatible phones with metallic finishes will charge normally. -
Page 19: Care And Maintenance
EQ OPERATION This unit provides 5 differences sound modes to enhance your listening experience. You can select the desired effect by tapping the EQ BUTTON (#24) repeatedly to get the effect you want: FLAT ROCK CLASSIC JAZZ Note: FLAT is EQ turned off and no EQ icon will light. CARE AND MAINTENANCE 1. -
Page 20: Troubleshooting Guide
TROUBLE SHOOTING GUIDE If you experience difficulties in the use of this workstation, please check the following or call 1-800-777-5331 for Customer Service and support. Symptom Possible Cause Solution The unit does not The unit is disconnected from Reconnect to the AC outlet. respond (no power) the AC outlet. -
Page 21: Specifications
Replace the USB cable or try No charging from The USB cable is damaged or the USB port not securely attached. reconnecting it again. Wireless charging is There is a protective case on Take off the protective case from slow the surface of the smart phone. - Page 22 1 YEAR LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 1 year from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Need help?
Do you have a question about the SB5050 and is the answer not in the manual?
Questions and answers
how do I reset my sb5050 Studebaker radio after a power outage
The Studebaker SB5050 has a battery backup for the clock, which helps retain settings during a power outage. However, if the device needs to be reset after a power outage, follow these steps:
1. Check the Power Connection – Ensure the unit is properly plugged into a working power outlet.
2. Verify the Battery Backup – If the clock settings were lost, replace the backup battery if needed.
3. Reset the Clock and Alarms – Manually set the time and alarms again if they were lost.
4. Reconnect Bluetooth Devices – If Bluetooth connections were lost, re-pair your device.
5. Test Functions – Ensure the radio, CD player, and other features are working correctly.
If the unit is still not functioning properly, try unplugging it for a few minutes and then plugging it back in to reset it.
This answer is automatically generated