Cotech SP-LS3M120GR-01B Quick Start Manual

LED Grow Light Strip
Art. no 36-8517 Model SP-LS3M120GR-01B
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you experience any technical problems or have questions, please
contact our customer service team.

Safety

Warning
• Do not use the light strip if it, its power cord or power adapter is
damaged in any way.
• The light strip must only be connected to a 230 V, 50 Hz power supply.
• Never try to open, repair, dismantle or modify the product in any way.
Warning – electric shock hazard
• The light sources in this light strip are not replaceable. When the
light sources reach the end of their life the whole light strip must
be discarded.
• Installation and maintenance work on the product involves the risk
of an electric shock.
• If the power cord is damaged it must be replaced by cable with
identical specifications as the original.
Class II power adapter.
Class III light strip.
The light sources are not dimmable.
This product is not intended as a source of general lighting.
GREAT BRITAIN • CUSTOMER SERVICE Internet www.clasohlson.co.uk

Installation

Warning
Ensure that there are no electrical wires or water pipes in the ceiling or
wall where you intend to drill/screw.
1. Mount the light strip using the provided silicone clips and some
suitable screws.
2. Connect the light strip to the power cord.
3. Connect the power cord to the power adapter.
Note: The connectors only fit together one way.
4. Connect the power adapter to a suitable wall socket.

Instructions for use

Note
• Distance: The intensity of the light is inversely proportional to
the square of the distance from the light source, which means that
if you double the distance between the light and an object, only a
quarter of the light will reach the object. It is therefore important that
grow lights are mounted as close as possible to the plants and that
the light is evenly distributed.
• Plant illumination time: Most plants grow better when not
exposed to 24-hour light, they also require a period of darkness.
We recommend that the grow light is used with a timer.

Care and maintenance

• The light fitting should be cleaned using a dry cloth or
vacuum cleaner.
• Disconnect the light fitting from the wall socket if it is not to be used
for a long time.

Troubleshooting guide

The light strip • Check that there is power at the wall socket.
does not shine. • Make sure that the power cord is undamaged
and is properly connected to both the light strip
and the wall socket.
• Check that the light strip is not damaged in
any way.

Responsible disposal

This symbol indicates that the product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect
waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling the product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of
in an environmentally sound manner.

Specifications

Rated voltage 220−240 V AC, 50/60 Hz
Power adapter 12 V DC, 2 A
Power cord 2 m
Light strip length 3 m
Light source LED
Photosynthetic photon flux
PPF 28 μmol/s
PPFD @20 cm 20 μmol/m²/s
Wavelength Blue 455 nm
Red 660 nm
Colour temperature 3500 K
CRI Ra 96 (full colour spectrum)
Power 23 W