Page 1
USER MANUAL ENGLISH RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Ordercode: □ □ □ □ D7674 D7675 D7676 D7677 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
Page 2
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Preface Thank you for purchasing this Showgear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Introduction Before Using the Product Important Read and follow the instructions in this user manual before installing, using or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Intended Use This product is intended for professional use as a server rack cabinet in theaters, entertainment facilities, public venues, and similar. It is suitable only for indoor use. This product is not suitable for households.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Safety Important Read and follow the instructions in this user manual before installing, using or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Attention For professional use only This product shall be used only for the purposes it is designed for. This product is intended for professional use as a server rack cabinet in theaters, entertainment facilities, public venues, and similar.
This makes it easy to install and install equipment. The RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 has a black, metal housing and comes with a dedicated 19-inch rack installation kit, bolt & washer, cage nut, keys and screws.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Product Specifications Model: RCA-FSG-18 RCA-FSG-22 RCA-FSG-32 RCA-FSG-42 Physical: 18 U 22 U 32 U 42 U Rack units: 19” x 18 U (LxH) 19” x 22 U (LxH) 19” x 32 U (LxH) 19”...
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. Installation must be carried out only by instructed or skilled persons. Installation Site Requirements Attention Make sure that there is enough space for ventilation around the cabinet.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Assembling the Cabinet Attention Heavy object This product is heavy. Minimum two persons are necessary to assemble or to move the cabinet. To assemble this cabinet follow the steps below: Unpack all packages and carefully lay the parts out on the floor.
Page 19
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Carefully put the cabinet on its side, to make the execution of the following steps easier. Use a hex key (S) to attach the 4 wheels (K) to the bottom of the bottom plate (A) with 4 x 4 screws (O), as shown in Fig.
Page 20
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Make sure that the adjustable feet (J) are extended more than the wheels (K). If necessary, use a wrench to turn the bottom nut of the adjustable feet (J) counterclockwise, as shown in Fig. 25. This will prevent the cabinet from rolling on the wheels when you put it in upright position.
Page 21
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Slide the 4 horizontal brackets (H) into the holes of the 2 frames (B), as shown in Fig. 29. Make sure that the horizontal brackets (H) are installed horizontally and are not inclined.
Page 22
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Put the 2 metal plates (I) on top of the holes of the top plate (C), as shown in Fig. 33. Attach the 2 metal plates (I) to the frames (B) with 2 screws (O) per plate, as shown in Fig. 34.
Page 23
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Slide the 2 plastic locks of the side panel (D) inwards and at the same time carefully close the side panel (D), so that it locks in position, as shown in Fig. 37.
Page 24
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Carefully pull down the spring-loaded lever so that lever is aligned with the hole on the bottom of the top plate (C) and slowly release it, as shown in Fig. 41. Make sure that the mesh door (E) is firmly locked in the hole on the bottom of the top plate (C) and the hole on the top of the bottom plate (A).
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Equipment Installation WARNING Stability hazard This product may fall or tip over, causing serious personal injury and material damage. ● Make sure that the cabinet is fully assembled and secured before you install equipment in the cabinet.
Page 26
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 To mount equipment, follow the steps below: 01) Put 4 cage nuts (M) in front of the holes on the vertical brackets (G) at the place where you want to mount the equipment, as shown in Fig. 43.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Maintenance Preventive Maintenance Attention Before use, examine the cabinet visually for any defects. Make sure that: ● All screws used for installing the cabinet are tightly fastened and are not corroded. ● There are no deformations on materials.
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 Deinstallation, Transportation and Storage Instructions for Deinstallation Attention Heavy object This product is heavy. Minimum two persons are necessary to disassemble or to move the cabinet. ● Deinstallation must be carried out only by instructed or skilled persons.
Need help?
Do you have a question about the RCA-FSG-18 and is the answer not in the manual?
Questions and answers