Bauhn ADABR-1222 User Manual

Have you got everything?

Unpack the box (be gentle) and make sure all of these items are there:
A. DAB+ Radio
B. USB-C Cable
SELECT/ENTER: turn the knob
1.
clockwise/anti-clockwise to scroll up/
down on the menu. Press the knob
to confirm selection/stop playback or
resume playback.
VOL + / - : turn the knob clockwise/
2.
anti-clockwise to increase/decrease
volume. Press the knob to mute the
sound.
3. : press and hold to turn the radio on
or to standby.
MODE: press to switch between
4.
modes.
INFO/MENU: press to view info, press
5.
and hold to enter menu settings.
SCAN: press to scan all DAB and FM
6.
stations.
LCD DISPLAY
7.
PRESET: press to recall the preset
8.
channel. Turn the SELECT/ENTER
knob to change and select the
channel.
SPEAKERS
9.
10. ANTENNA: stick out the antenna
when using DAB/FM function.
11. HEADPHONE JACK: connect to your
headphones using a 3.5mm audio
cable (not included).
12. AUX PORT: connect to your audio
device using an AUX cable (not
included).
13. CHARGING LED LIGHT INDICATOR:
lights up red when charging/green
when charged.
14. DC 5V PORT: For USB-C charging.

Operation

For first time use, charge the radio using the supplied USB-C cable. Connect the USB-C cable to the
DC 5V port on the back of the radio and the other end to a power source. Charge for 5 hours. During
charging, the charging LED light will light up red and will light up green once fully charged.
Fully extend the antenna out. Press and hold the
enter DAV mode and search for available stations. You can also press the SCAN button to search
again. After searching, the stations with a clear signal will be synchronised and saved. Use the
SELECT/ENTER knob to switch between stations and press the knob to play the station. Press the
INFO/MENU button to view the current station information, frequency, channel number and so on.
Press the MODE button to switch to FM mode. Press the SCAN button to search for stations, and the
stations with a clear signal will be synchronised and saved. Press and hold the PRESET button to save
a station and press to bring up the saved station. Use the SELECT/ENTER knob to switch between
stations and press the knob to play the station. Press the INFO/MENU button to view the current
station information, frequency, channel number and so on.
To recall a preset station, press the PRESET button and turn the SELECT/ENTER knob to select the
previous/next station. Press the knob to confirm station.
Press the MODE button repeatedly until it enters Bluetooth
"BT disconnected" and a sound will be heard. On your device, select "ADABR-1222" to pair with the
product. If successfully connected, the LCD display screen will show "BT connected". You can now
start streaming your device's music to the product.
When auto searching for stations, the date and time will automatically synchronise to the station date
and time. To set manually, press and hold the INFO/MENU button when on DAB mode and select
Time/Date. Use the SELECT/ENTER knob to set the date and time. Once set, press and hold the
INFO/MENU button to exit the menu settings.
Note: the date, time and clock will reset when powered off. It will update once the station transmits
information to the unit.
Your new product is ready to enjoy!
Now sit back and relax... your new product is automatically covered
DAB+ Radio with Bluetooth
C. User Guide
D. Warranty Certificate
Top View
3
Front View
Well done, you made it.
by a 1-year warranty. How nice!
User Guide
Wireless Connectivity
®
C

Product Overview

1
2
4 5 6 7 8 9
button to turn the radio on. It will automatically
mode; the LCD display screen will show
®
Model: ADABR-1222
D
10 11 12 13 14
Rear View