Advertisement
Available languages
Available languages
HOW TO OPERATE
1. Remove the unit from the box and take off any
protective wrapping.
2. Place the heater on a smooth level surface and at least
30cm away from any obstacles.
3. Plug your fan heater into the power supply. Make sure
your power supply corresponds to the power indicated
on the rating label.
4. Heat temperature setting can be regulated using the
switch located on the left bottom part of the heater. The
other switch located in the right bottom part of the
heater is used to regulate de fan speed. To activate this
function do the following:
* Fan-for a lower power air circulator; Turn the dial on the
right clockwise, once for the fan start functioning.
* Turn it twice for the Medium fan speed.
* Turn the switch once more for High speed setting.
Advertisement
