Download Print this page

NITEforce RangeFinder 1200 m 8x42 User Manual

Table of Contents

Download this manual

RangeFinder 1200m 8x42

CE Declarations:

Binocular optics setting/adjustment

Adjust the eyecups

The eyecups twist up and down so that any viewer can see the full field and enjoy comfortable viewing with or without

eyeglasses. There are 2 options for your choice. When not using eyeglasses, please twist the eyecups up or keep the

eyecups fully extended. For the best viewing when viewing through eyeglasses, twist eyecups down.

The interpupillary distance is the distance between the centers of the left and right eye pupils. Match the interpupillary

Table of Contents

Do you have a question about the RangeFinder 1200 m 8x42 and is the answer not in the manual?

Page 1 © Copyright 2022 www.niteforce.mobi RangeFinder 1200m 8x42 CE Declarations: Binocular optics setting/adjustment Adjust the eyecups The eyecups twist up and down so that any viewer can see the full field and enjoy comfortable viewing with or without eyeglasses. There are 2 options for your choice. When not using eyeglasses, please twist the eyecups up or keep the eyecups fully extended.
Page 2 © Copyright 2022 www.niteforce.mobi distance of your eyes to that of the binocular so that you see a single image that is free of shading. Rotate the binocular barrels inward or outward to line your eyes up with ocular lenses.
Page 3 © Copyright 2022 www.niteforce.mobi Accessories Carry case, lens covers & neckstrap Neckstrap Attach the padded neckstrap in 3 steps as pictures illustrated below. 1. Push a few inches of the strap through the strap attachment. 2. Hold the buckle and thread the end of the strap through the buckle 3.
Page 4 NITEforce or NITEforce authorized service center or acts beyond the manufacturer's control. PRODUCT REPAIR Repairs for damages not covered by the warranty will be subject to a charge. Please contact nearest NITEforce sales agency shop to discuss repair options not covered under warranty. WARRANTY WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.