Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SuperSail Mrk. 2
Summary of Contents for SuperSail Mrk. 2
- Page 1 Installation Manual Wireless Water Sensor Mrk. 2...
- Page 2 Before you start using the unit you must ensure that the packaging has not been broken or have been injured during transport and that the product is complete and without any visible sign of damage or strained. If this is not the case please contact SuperSail before using the product.
- Page 3 Installation Manual Installation of batteries Remove the Control unit from the holder, by pushing the lock mechanism in and carefully pulling the Control unit upwards. Install the 2 included LR44 button cell batteries in the Control unit, as shown at the unit. The batteries are maintained by the spring in the unit.
- Page 4 Installation Manual Testing the Water Sensor When the water sensor is installed and activated in the alarm system, the function of the water sensor must be tested. Put the black sensor into water. When the water sensor register water, the LED in the transmitter unit is turned on shortly.
- Page 5 Installation Manual Maintenance The water sensor is maintenance free. Repairs should be carried out at an authorized service center. Cleaning can be carried out with a soft cloth wrenched in lukewarm water. Cleaning detergent containing solvent can harm the unit. Technical Specifications Radio frequency: 868.3 MHz...
- Page 6 Activation in the Alarm system After installation and test, the water sensor must be activated in the Alarm system. This is performed via the SuperSail app, where the water sensor is activated via the Alarm menu. In the above example we have activated a water sensor as sensor #5 and #6 – several water sensors can be connected, and all wireless sensor fields can be used.
Need help?
Do you have a question about the Mrk. 2 and is the answer not in the manual?
Questions and answers