Advertisement
Lumination
(LRXB - Series)
®
LRXB347V277 Stepdown Transformer Kit Installation
1
Ensure that the power to the unit is turned off. Use proper lockout and tagout procedures.
AC
2
Carefully take out the 347V kit and fixture from different
packages. Connect fixture conduit to the 347V kit J-box.
Connect White wire (N) from fixture to White from kit.
Black (L) from fixture to light purple wire from kit. Dimming
wires connect to dimming wires from kit conduit.
Dimming
line
AC line
Connect the step transformer conduit to the existing AC
3
and dimming leads in the junction box. Verify that the AC
supply line and dimming leads are connected properly. If
dimming leads will not be utilized, please do not remove
the twist-on wire connectors.
TRANSFORMER
FIXTURE
Transformer
gecurrent.com/lumination
© 2022 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to
change without notice. All values are design or typical values when measured under laboratory conditions.
4
Insert LRXB Series fixture into ceiling.
Installation Guide
Page 2 of 2
(Rev 09/28/22)
INDxxx
Advertisement
