®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G Notebook Adapter with
RangeBooster
• Setup Wizard CD-ROM
• User Guide on CD-ROM
• Quick Installation
4 .
2
GHz
Wireless-G
802.11g
Notebook Adapter with
RangeBooster
Wireless
Model No.
WPC54GR
Model No.
1
Begin Installation
IMPORTANT: Do not install the Adapter in your PC until
you are instructed to do so in Step 2 or the Adapter will
not install correctly.
A
The Network Adapter is
installed and set up using
the Setup Wizard that
comes on the enclosed
CD.
B
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run automati-
cally, and the Welcome
screen should appear.
C
To install the Adapter, click
Click Here to Start on the
Welcome screen.
D
After reading the License
Agreement, click Next to
continue the installation
and Windows will begin
copying the files onto your
PC.
E
Windows will begin copying
the files onto your PC.
F
The Setup Wizard will now
prompt you to install the
Adapter into your PC.
Proceed to Step 2.
Quick Installation
2
A
B
C
D
C
E
D
Connect the Adapter
Locate an available Card-
Bus slot on your notebook
PC.
With the connector pin end
facing the CardBus slot and
the label facing up, slide
the Adapter into the Card-
Bus slot until it locks in place.
Connecting
Windows will begin copying
the driver files to your com-
the Adapter
puter. If Windows asks you
for the original Windows CD-
ROM, insert the CD-ROM,
and direct Windows to its
correct location (e.g., D:\).
Then, click Next.
Windows 98 and Windows
Me users may need to
restart their PCs again when
prompted to do so.
Proceed to Step 3.