Cobra XRS 9700 Operating Instructions Manual page 7

EasySet Programming
Your Detector
This EasySet programming menu lists all of the modes and settings
you can choose from after you have entered Program mode as
described on page 7.
EasySet Programming Menu
Mode Tone Or Voice Visual Setting Result
Set City Two (2) beeps City X
mode
default*
One (1) beep City X
beep Off
One (1) beep City X+K
IntelliMute Two (2) beeps IntelliMute On All alerts (except for strobe signals
mode
One (1) beep IntelliMute Off Normal operation.
Set IntelliMute One (1) beep Set IntelliMute
RPMs (see page 15
(not shown to set activation
if IntelliMute point)
is off)
AutoMute Two (2) beeps AutoMute On
mode
One (1) beep AutoMute Off
Set compass One (1) beep Set Compass
(see page 17
to calibrate
compass)
Pop Detect Two (2) beeps Pop Detect On The unit will detect Pop signals.
mode
One (1) beep Pop Detect Off The unit not will detect Pop signals.
English
8
A single beep sounds when the
signal is first detected.
Audio for all X band alerts are blocked
until signal strength reaches Level 3.
Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
from emergency vehicles) are
automatically muted below the
engine rev point you set.
Allows you to set the engine
rev point while using IntelliMute.
The audio volume of all alerts will be
automatically muted after four (4) seconds
for as long as the signal is detected.
All alerts will sound at full volume
for as long as the signal is detected.
Allows you to calibrate the compass.
EasySet Programming
Your Detector
EasySet Programming Menu
Mode Tone Or Voice Visual Setting Result
VG-2 Detect Two (2) beeps VG-2 Detect On The unit will detect VG-2 signals.
mode
One (1) beep VG-2 Detect Off The unit will not detect VG-2 signals.
VG-2 Audio Two (2) beeps VG-2 Audio On With VG-2 Detect on, the unit will give
mode (not
shown if VG-2
One (1) beep VG-2 Audio Off With VG-2 Detect off, the unit will give
detect is off)
Spectre 1 Two (2) beeps Spectre 1
Detect mode Detect On
One (1) beep Spectre 1
Detect Off
Spectre 1 Two (2) beeps Spectre 1
Audio mode Audio On
(not shown if
One (1) beep Spectre 1
Spectre 1
Audio Off
detect is off)
SmartPower Two (2) beeps SmartPower
mode On
One (1) beep SmartPower
Off
X Band detect Two (2) beeps X Band On
mode
One (1) beep X Band Off
Set display Two (2) beeps Display Dim
Dim mode
One (1) beep Display
default*
Dimmer
One (1) beep Display Dark
Restore One (1) beep Restore
factory Factory
settings Settings
Exit program One (1) beep EXIT
PROGRAM
* The settings for these user modes can also be changed with the one (1) button method.
See description of each user mode (pages 10 and 24) for details.
audible alerts for VG-2 signals.
only visual alerts for VG-2 signals.
The unit will detect Spectre 1 signals.
The unit will not detect Spectre 1 signals.
With Spectre 1 Detect on, the unit will
give audible alerts for Spectre 1 signals.
With Spectre 1 Detect off, the unit will give
only visual alerts for Spectre 1 signals.
SmartPower is on.
SmartPower is off.
The unit will detect X Band signals.
The unit will not detect X Band signals.
Partially dimmed for dusk or night driving.
More dimmed for dusk or night
driving.
Display is off.
Resets user modes and settings to
factory default.
Allows you to exit Program mode.
Nothing comes close to a Cobra ® 9