Velvet Kosmos Series User Manual

Hide thumbs

Table Of Contents

100

page of 100

/ 100
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Location

Studio

Last updated on November 2022

User manual

Table of Contents

Summary of Contents for Velvet Kosmos Series

Page 1 Location Studio Last updated on November 2022 User manual...
Page 2 velvetlight.tv...
Page 3 For your own safety, please read and follow all safety instructions and precautions warnings. Exemption VELVET (THELIGHT Luminary) does not assume any responsibility for lighting from liability failures caused by malfunction of this product. The manufacturer disclaims liability for any damage to persons or property caused by inappropriate operation, damage of this kind lies in the responsibility of the operator.
Page 4 Working conditions • Maximum allowed tilt angles are 90º up and 90º down. • Ambient temperature (at the place of operation or storage): Minimum -20ºC Maximum + 45ºC • Minimum distances from inflammable surface: 0,1 m 90º max 90º max 0,1 m 0,75 m...
Page 5 Do not open the product. Doing so will invalidate the product warranty. Do not attempt to repair any part of the product on your own. Maintenance and repair work to be carried out only by VELVET Service Centre. Never connect the product to a dimmer system or a dimmer channel in non-dim mode.
Page 6 Though the light generated by LED does not produce any heat, for what his use turns out to be very comfortable for the actors, the lamp head acts as a heat sink through its back part. Surface can reach a temperature between the 20ºC and the 60ºC.
Page 7: Table Of Contents
Table of contents Main features Firmware updates history KOSMOS range models KOSMOS 400 Location Parts Specifications Photometrics Power options KOSMOS 400 Location accessories Light Engine Rigging Battery adapters Beam Control Transport Remote Control Cables KOSMOS 400 Studio Parts Specifications Photometrics Power options KOSMOS 400 Studio accessories Light Engine...
Page 8 Effects list Settings DMX-RDM control 8 bits DMX map chart 16 bits DMX map chart Kelvin DMX Dimming curve Fixture control Ethernet Wireless control Wi-fi Art Net Bluetooth Velvet Goya App About Firmware update Maintenance and care Regulations Warranty QR links...
Page 9: Main Features
With KOSMOS beam change is instant at your fingertips, local or remotely, with a DMX wire or wireless. V5 ceramic VELVET KOSMOS includes a state of the art VELVET proprietary super light engine compact 35mm full-color light engine. A total of 212 Red, Green, Blue,...
Page 10 Bluetooth to control from Smartphone or tablet with VELVET Goya App* Wire control DMX-RDM through XLR-5 IN and through connectors Art-Net through Ethernet RJ-45 connector (only STUDIO version). *VELVET Goya is a free of charge App available for Android and iOS.
Page 11 A. Main features Local control The full color touchscreen simplifies any light, zoom or effects setting while two rotary knobs provide precise manual adjustments. • Gels list are displayed as colors. • White light or color adjustment presets are always visible on its real color. •...
Page 12: Firmware Updates History
A. Main features FIRMWARE UPDATES HISTORY V01.04 • Gels mode with library extension • Gels mode with improved color accuracy implementations • Gels mode added new list of light sources • PRESET displays the registered Gels parameters when saved • Green/Magenta warning icon shows a green or magenta color warning •...
Page 13: Kosmos Range Models
Every KOSMOS color tunable Fresnel is offered in two different versions: LOCATION and STUDIO dustproof. The main differences are: Location VK400CNY VELVET Kosmos 400 Color Location without yoke • Can be powered both AC (90-264 VAC) and DC (26-48V DC) 1x XLR-3 DC in connector •...
Page 14: Parts
Location Studio C. KOSMOS 400 Location VELVET KOSMOS 400 location (Ref: VK400CNY) PARTS 300mm/12” Borosilicate glass fresnel lens Housing for VK42-BP (Battery mount adapter) Touchscreen display USB connectors PowerCon TRUE 1 In & Out connectors 8A AC fuse Main power swicth 2x Rotary dials XLR-5 DMX RDM In &...
Page 15: Specifications
WIRE CONTROL Full DMX-RDM with XLR-5 In & Out connectors WIRELESS CONTROL LumenRadio CRMX built-in, Wi-Fi Art-Net sCAN and Bluetooth, Android and iOS using VELVET Goya free charge app TLCI INDEX 3200K TLCI 96 / 5600K TLCI 98 PHOTOMETRICS 50º - 3200K 13º...
Page 16: Photometrics
Location Studio C. KOSMOS 400 Location PHOTOMETRICS 50° Diameter Distance 13° Diameter Distance 3200K TLCI 96 5600K TLCI 98...
Page 17: Power Options
BATTERY POWER 24 to 48 VDC Connect any battery from 26 to 48 VDC to the XLR3 connector. When powering VELVET KOSMOS Location from an external battery through the XLR3 connector check that the pin-out of the battery matches the pin-out of the KOSMOS as shown in the pin-out picture at the bottom of the fixture.
Page 18 VELVET KOSMOS Location can also be directly powered with two 14.4V Vlock or Gold batteries using VELVET Double Vlock or Gold plate delivering full power light around one hour (200Wh 14.4V x Use batteries of at least 200W capacity each of them and to ensure maximum performance of the fixture use only high-load capacity batteries with a high continuous draw meaning a Discharge Current of at least 10A.
Page 19: Kosmos 400 Location Accessories
Location Studio D. KOSMOS 400 Location accessories Weatherproof models accessories LIGHT ENGINE VK400C-LED VELVET KOSMOS 400 V5LED color ceramic light engine RIGGING VK42-YTK Manual Operated yoke Kit for KOSMOS with Euro28mm junior pin BATTERY ADDAPTERS VK42-BP Fixed battery plate KIT to install quick link adapter.
Page 20: Beam Control
Location Studio D. KOSMOS 400 Location accessories BEAM CONTROL VK400-RB KOSMOS 400 4 folding barndoors kit VK400-RB8 KOSMOS 400 8 folding barndoors kit VK400-FF KOSMOS 400 filter frame VK400-SB DopChoice Snapbag light box for KOSMOS 400 VK400-SGxSB DopChoice 40º Foldable Snapgrid KOSMOS 400.
Page 21: Remote Control
Location Studio D. KOSMOS 400 Location accessories REMOTE CONTROL VE-ROUTER VELVET Wi-Fi router to remotely control KOSMOS CABLES CAB-XLR3DCC4.5M DC extension cable 4,5 meters / 15 feet XLR3 CAB-PWC2MTRUE PowerCon TRUE1 daisy- chain cable 2m / 6 feet for AC with 2 aerial connectors TRUE1 In &...
Page 22: Parts
Location Studio E. KOSMOS 400 Studio VELVET KOSMOS 400 Studio (Ref: VK400CSTNY) PARTS 300mm/ 12” Borosilicate glass fresnel lens Touchscreen display USB connectors POWERCON TRUE 1 In & Out connectors 8A AC fuse Main power swicth 2x Rotary dials XLR-5 DMX RDM In & Out connectors...
Page 23: Specifications
COOLING Passive liquid cooling system into sealed 3D chamber with ultra silent fan PROTECTION IP30, indoor or outdoor protected use LIGHT ENGINE 35mm full color spectrum R+G+B+W+CW VELVET ceramic LED CONSTRUCTION & FINISH Fixture and yoke made of die-cast aluminum...
Page 24: Photometrics
Location Studio E. KOSMOS 400 Studio PHOTOMETRICS 50° Diameter Distance 13° Diameter Distance 3200K TLCI 96 5600K TLCI 98...
Page 25: Power Options
Location Studio E. KOSMOS 400 Studio POWER OPTIONS AC POWER 90 to 264 VAC The KOSMOS 400 Studio can be exclusively powered by AC power. Connect the power cable to the PowerCon TRUE1 TOP and the power plug with a mains power outlet. CAB-PWC2MTRUE CAB-PWC4MTRUE High light beam intensity: The lamp head is equipped with power...
Page 26: Light Engine
Location Studio D. KOSMOS 400 Location accessories Weatherproof models accessories LIGHT ENGINE VK400C-LED VELVET KOSMOS 400 V5LED color ceramic light engine RIGGING VK42-YPO Pole Operated yoke Kit for KOSMOS 400 VK42-YTK Manual Operated yoke Kit for KOSMOS with Euro28mm junior pin...
Page 27: Remote Control
Studio D. KOSMOS 400 Location accessories VK400-SL DopChoice large Lantern dome for KOSMOS 400. REMOTE CONTROL VE-ROUTER VELVET Wi-Fi router to remotely control KOSMOS CABLES CAB-XLR3DCC4.5M DC extension cable 4,5 meters / 15 feet XLR3 CAB-PWC2MTRUE PowerCon TRUE1 daisy- chain...
Page 28: Placing Into Operation
Location Location Studio Studio G. Placing into operation Placing into operation YOKE TO FIXTURE ASSEMBLING VK42-YTK Manual Operated yoke Kit for KOSMOS with Euro28mm/junior pin Yoke assembling pieces a. M4300P17S000 Nylon side bushing for KOSMOS yoke b. TOR-KWS Ferodo washer for KOSMOS yoke c.
Page 29 Location Location Studio Studio G. Placing into operation Steps scheme STEP 1 Use a mallet or hammer to press the spigot into the square housing of the tubular yoke (h). Secure the assembly with the washer Spigot assembling screw (l).
Page 30 Location Location Studio Studio G. Placing into operation STEP 2 Place the ferodo washer on the inside of the yoke (h). Place the side bushing and the three conical washers on the outside and Yoke assembling use the allen screw to fix the parts with the fixture and select the desired friction.
Page 31 Location Location Studio Studio G. Placing into operation STEP 4 Use the screw on the inside of the yoke and the knurled nut the outside to attach the safety cable to the yoke. Safety cable...
Page 32: Pole Operate To Fixture Assembling
Location Studio G. Placing into operation POLE OPERATED YOKE TO FIXTURE ASSEMBLING VK42-YPO Pole Operated yoke Kit for KOSMOS 400 a. KOSMOS-Y-POLEOP KOSMOS-Y-POLEOP b. TOR-I7379M8X55 M8x55 Allen screw c. TOR-D912M8X100T M8x100 Allen screw d. Q400P170001 Nylon spacer bushing for PO KOSMOS yoke e.
Page 33 Location Studio G. Placing into operation STEP 1 Place the KOSMOS fixture by positioning the PO loop gearbox on the right side of the unit looking at it from the back. Use the spacer bushing on the inside left side of the yoke and fix the assembly with the washer and the M8x55 screw on the outside.
Page 34: Mounting And Security
Studio Studio G. Placing into operation MOUNTING AND SECURITY VELVET KOSMOS fixtures have been designed to be easily installed and rigged up on studio, special locations and vehicles. Ref: SLI-200000FS When a VELVET KOSMOS and any other component is mounted in...
Page 35: Accessories Installation
Location Location Studio Studio H. Accessories installation Accessories installation BARNDOORS INSTALLATION VK400-RB KOSMOS 400 4 folding barndoors kit VK400-RB8 KOSMOS 400 8 folding barndoors kit STEP 1 Snap the upper visor hook into the metal notch at the top of the equipment lens.
Page 36: Snapbag, Snapgrid And Lantern Installation
Location Location Studio Studio H. Accessories installation Press the metal socket on the bottom of the KOSMOS lens to engage STEP 2 the bottom of the visor. Release to allow the spring mechanism to exert pressure to secure the assembly. Press SNAPBAG, SNAPGRID AND LANTERN INSTALLATION VK400-SB...
Page 37: Kosmos Location / Studio
Location Location Studio Studio I. Diagrams Diagrams VELVET KOSMOS + MO Yoke 499 mm 320 mm VELVET KOSMOS + PO Yoke...
Page 38: Menu Overview
Location Location Studio Studio J. Menu overview Menu overview POWER ON/OF After switching on the KOSMOS initializes for a few seconds to be ready for operation through its full-color touchscreen plus two rotary knobs. The KOSMOS will show the last white light, color and zoom settings and the source will emit light only as per the last setting High light beam intensity: The lamp head is equipped with power LED.
Page 39: Display Structure
Location Location Studio Studio J. Menu overview DISPLAY STRUCTURE Kelvin Preset Waring icons control knob Zoom and dimmer Adjustable parameters Output color reference Bottom control Control modes and settings knob Kelvin By pushing once resets to White Light 3200K, pushing again resets to 5600K and by pushing a third time goes back to the last white light or color setting.
Page 40 Location Location Studio Studio H. Accessories installation Color area The color area over the control modes buttons shows a real time emulation of every color adjustment as a visual reference of the light emitted by the fixture. Control The different Control Modes allow you to select the colorimetry parameters Modes and through the CCT, HSI, RGB and GELS modes.
Page 41: Control Options
J. Menu overview CONTROL OPTIONS The KOSMOS can be fully, quickly and easily controlled in any possible way. Locally, through DMX connector, wirelessly. From your smartphone or tablet using the VELVET Goya app or with third-party applications. Local control • On-board control with full color touchscreen plus two rotary knobs WIRE CONTROL •...
Page 42: Zoom And Control Modes
Location Location Studio Studio K. Zoom and Control Modes Zoom and Contro Modes ZOOM/BEAM ANGLE ADJUSTMENT You can locally adjust the beam angle in two ways: • Push the ZOOM button and directly set the beam angle by rotating the top knob. •...
Page 43: Hsi Mode
Location Location Studio Studio K. Zoom and Control Modes HSI MODE / COLOR LIGHT Push DIMMER button and directly set the intensity by rotating the top knob. Push the KELVIN, SATURATION or HUE buttons and directly set the desired value by rotating the bottom knob.
Page 44: Rgb Mode
Location Location Studio Studio K. Zoom and Control Modes RGB MODE Push DIMMER button and directly set the intensity by rotating the top knob. Push the KELVIN, SATURATION or RED, GREEN and BLUE buttons and directly set the desired value by rotating the bottom kno NOTES When the Saturation value is 0, the light emitted by KOSMOS is just white light with the Color Temperature setting selected and shown on...
Page 45: Gel Mode
Location Location Studio Studio K. Zoom and Control Modes GELS MODE / COLOR LIGHT On GEL Mode you can easily select any color filter from a wide and user-friendly library. • Sort the filters on alphabetical or on color order. •...
Page 46: Gel Mode / Lists Sorting
Location Location Studio Studio K. Zoom and Control Modes GELS MODE / LIST SORTING Press LIST button to choose among “L” filter library, “R” filter library of Light sources library. You also have a small library of standard light sources. Sort the filters list on alphabetical or on color order.
Page 47: L" Gels List
Location Location Studio Studio K. Zoom and Control Modes “L” GEL LIST (Page 01/03) 002 Rose Pink 036 Medium Pink 102 Light Amber 127 Smokey Pink 003 Lavender Tint 046 Dark Magenta 103 Straw 128 Bright Pink 004 Med.Bastard Amb. 048 Rose Purple 104 Deep Amber 131 Marine Blue...
Page 48 Location Location Studio Studio K. Zoom and Control Modes “L” GEL LIST (Page 02/03) 154 Pale Rose 188 Cosmet.Highlight 207 Full CTO + .3 ND 243 L. Fluoresc.3600K 156 Chocolate 189 Cosm.Silver Moss 208 Full CTO + .6 ND 244 L. Plus Green 157 Pink 191 Cosmet.Aqua Blue 212 L.C.T.Yellow(Y1)
Page 49 Location Location Studio Studio K. Zoom and Control Modes “L” GEL LIST (Page 03/03) 444 1/8 CTS 708 Cool Lavender 708 Cool Lavender 776 Nectarine 600 Arctic White 709 Electric Lilac 731 Dirty Ice 778 Millennium Gold 601 Silver 710 Spir Special Blu 733 Damp Squib 779 Bastard Pink 602 Platinum...
Page 50: R" Gels List
Location Location Studio Studio K. Zoom and Control Modes “R” GEL LIST (Page 01/02) 002 Bastard Amber 051 Surprise Pink 318 Mayan Sun 2006 VS Azure 006 No Color Straw 060 No Color Blue 321 Soft Golden Amb. 2007 VS Blue 008 Pale Gold 062 Booster Blue 325 Henna Sky...
Page 51 Location Location Studio Studio J. Menu overview “R” GEL LIST (Page 02/02) 3220 Double CTB 3441 Full CTS 4515 15 Yellow 4930 30 Lavender 3304 Full Plusgreen 3442 1/2 CTS 4530 30 Yellow 4960 60 Lavender 3308 Full Minusgreen 3443 1/4 CTS 4560 60 Yellow 4990 90 Lavender 3309 3/4 Minusgreen...
Page 52: Presets
Location Location Studio Studio K. Zoom and Control Modes PRESETS KOSMOS allows you to save any white light or color setting of any Working Mode, including the Zoom parameter. A total of ten User Presets can be saved. Each Preset is displayed showing its numerical values of RGB, Color Mode and also its actual color.
Page 53: Effects
Location Location Studio Studio K. Zoom and Control Modes EFECTOS KOSMOS allows you to customize any effect by adjusting various parameters. For any effect, you can always use your custom setting or revert to the default values. You can save or load your own effects.
Page 54 Location Location Studio Studio K. Zoom and Control Modes NOTE The numerical values of the HUE parameters range from 0 to 360. Each value corresponds to the degrees of the Munsell color circle. By adjusting the HUE 1 and HUE 2 values it is possible to select the range of colors between which the effect will move.
Page 55: Effects List
Location Location Studio Studio K. Zoom and Control Modes EFFECTS LIST DISCO Switches between different colors and intensities, creating a loop. You can select on which colors you want to loop, the smoothness of the transitions, the speed of the changes, etc. Customizable parameters: Loop speed / Saturation / Hue 1 (0-360) / Hue 2 (0-360) / Kelvin (2500-9900K) / Smothness / Direction / Zoom start / Zoom end / Zoom speed...
Page 56 Location Location Studio Studio K. Zoom and Control Modes Emulates a TV screen effect by switching between different white or colored lights, selecting the range of colors displayed and being able to select the smoothness of the transitions and the speed of the loop with varying intensity.
Page 57: Settings
Location Location Studio Studio L. Settings Settings CONTROL DMX-RDM KOSMOS offers 10 DMX control Modes on 8 bit and 10 more on 16 bit. Use the 8-bit modes with basic controllers like dimmer consoles. The DMX mode can be selected onthe KOSMOS settings menu.
Page 58 Location Location Studio Studio K. Zoom and Control Modes DMX LOSS BEHAVIOUR (Comportamiento ante pérdida de señal DMX) and then push To set the behavior of the fixture when the DMX control signal is lost push the DMX button. Now you can directly tap on the preferred lost behavior option: Last command: The last received DMX command is used until the fixture is switched off or a valid DMX data is received Go to local: The fixtuee goes to the last settings entered in Local.
Page 59: Bits Dmx Map Chart
Location Location Studio Studio L. Settings 8 bits DMX MAP CHART (Firmware V01_05) KOSMOS DMX MAP 8 bits (Firmware V01_05) Mode Mode Name Channel Function Value Kosmos range Number Master intensity 0-255 0-100 (5 channels) Kelvin 0-255 2500K to 10000K Green / Magenta 0=Neutral 100M to 100G...
Page 60 Location Location Studio Studio L. Settings RGBWW Master intensity 0-255 0-100 (8 channels) 0-255 0-100 Green 0-255 0-100 Blue 0-255 0-100 Cold White 0-255 0-100 White 0-255 0-100 ZOOM 0-255 13º-56º 0-9 = Silence Fan speed according to LED temperature. Maximum power priority.
Page 61 Location Location Studio Studio L. Settings Parameter #4 0-255 0-100 Parameter #5 0-255 0-100 Parameter #6 0-255 0-100 Parameter #7 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º ZOOM STOP Position 0-255 13º-56º ZOOM SPEED 0-255 0-100 0-9 = Silence Fan speed according to LED temperature.
Page 62 Location Location Studio Studio L. Settings Green 0-255 0-100 Blue 0-255 0-100 ZOOM 0-255 13º-56º 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature. Maximum power priority. 20-29 = Full Speed Fan operates at maximum power.
Page 63 Location Location Studio Studio L. Settings CHANGING Master intensity 0-255 0-100 Mode Mode 60-69 : PRESETS 60-69 PRESETS PRESETS Preset number 0-255 0-10 (4 channels) 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature.
Page 64 Location Location Studio Studio L. Settings 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature. Maximum power priority. 20-29 = Full Speed Fan operates at maximum power. >=30 = Dynamic Fan speed according to LED temperature.
Page 65 Location Location Studio Studio L. Settings DISCO Hue 1 0-255 0º to 359º DISCO Hue 2 0-255 0º to 359º DISCO Kelvin 0-255 2500K to 10000K DISCO Smoothness 0-255 0-100 DISCO Direction 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º...
Page 66 Location Location Studio Studio L. Settings PULSE Flash time 0-255 0-100 PULSE Fade out 0-255 0-100 PULSE Saturation 0-255 0-100 PULSE Hue 0-255 0º to 359º PULSE Kelvin 0-255 2500K to 10000K Parameter #7 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º...
Page 67 Location Location Studio Studio L. Settings PAPARAZZI Kelvin 0-255 2500K to 10000K PAPARAZZI Flicker speed 0-255 0-100 PAPARAZZI Flash time 0-255 0-100 Parameter #4 0-255 0-100 Parameter #5 0-255 0-100 Parameter #6 0-255 0-100 Parameter #7 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position...
Page 68: Bits Dmx Map Chart
Location Studio L. Settings 16 bits DMX MAP CHART (Firmware V01_05) KOSMOS DMX MAP 16 bits (Firmware V01_05) Mode Mode Name Channel Function Value Kosmos range Number Master intensity Course 0-255 0-65535 (6 channels) Master intensity Fine 0-255 0-100 Kelvin 0-255 2500K to 10000K Green / Magenta...
Page 69 Location Studio L. Settings 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature. Maximum power priority. 20-29 = Full Speed Fan operates at maximum power. >=30 = Dynamic Fan speed according to LED temperature.
Page 70 Location Studio L. Settings 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature. Maximum power priority. 20-29 = Full Speed Fan operates at maximum power. >=30 = Dynamic Fan speed according to LED temperature.
Page 71 Location Studio L. Settings CHANGING Master intensity 0-255 0-65535 Mode Master intensity Fine 0-255 0-100 CCT+HSI Mode 10-19 : CCT+HSI 10-19 CCT+HSI (9 channels) Kelvin 0-255 2500K to 10000K Green / Magenta 0=Neutral 100M to 100G 1-121=100M to 1 M 122-132= Neutral zone 133-255 = 1G to 100G...
Page 72 Location Studio L. Settings ZOOM 0-255 13º-56º 0-9 = Silence Fan speed according to LED temperature. Maximum power priority. 10-19 = Dynamic Fan speed according to LED temperature. Maximum power priority. 20-29 = Full Speed Fan operates at maximum power. >=30 = Dynamic Fan speed according to LED temperature.
Page 73 Location Studio L. Settings Effect number 0-255 See document FX MODE PARAMETERS 8 BIT Parameter #1 0-255 0-100 Parameter #2 0-255 0-100 Parameter #3 0-255 0-100 Parameter #4 0-255 0-100 Parameter #5 0-255 0-100 Parameter #6 0-255 0-100 Parameter #7 0-255 0-100 Parameter #8...
Page 74 Location Studio L. Settings Red Fine 0-255 0-100 Green 0-255 0-65535 Green Fine 0-255 0-100 Blue 0-255 0-65535 Blue Fine 0-255 0-100 Cold White 0-255 0-65535 Cold White Fine 0-255 0-100 White 0-255 0-65535 White Fine 0-255 0-100 ZOOM 0-255 13º-56º...
Page 75 Location Studio L. Settings DISCO Kelvin 0-255 2500K to 10000K DISCO Smoothness 0-255 0-100 DISCO Direction 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º ZOOM STOP Position 0-255 13º-56º ZOOM SPEED 0-255 0-100 0-9 = Silence Fan speed according to LED temperature. Maximum power priority.
Page 76 Location Studio L. Settings PULSE Saturation 0-255 0-100 PULSE Hue 0-255 0º to 359º PULSE Kelvin 0-255 2500K to 10000K Parameter #7 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º ZOOM STOP Position 0-255 13º-56º ZOOM SPEED 0-255 0-100 0-9 = Silence...
Page 77 Location Studio L. Settings PAPARAZZI Flash time 0-255 0-100 Parameter #4 0-255 0-100 Parameter #5 0-255 0-100 Parameter #6 0-255 0-100 Parameter #7 0-255 0-100 Parameter #8 0-255 0-100 ZOOM START Position 0-255 13º-56º ZOOM STOP Position 0-255 13º-56º ZOOM SPEED 0-255 0-100 0-9 = Silence...
Page 78: Kelvin Dmx
Location Studio L. Settings KELVIN DMX (Firmware V01_05) KELVIN 6300 2500 6400 2600 6500 2700 6600 2800 6600 2900 6700 2900 6800 3000 6900 3100 7000 3200 7100 3300 7200 3400 7300 3500 7400 3600 7400 3600 7500 3700 7600 3800 7700 3900...
Page 79: Dimming Curve
Location Studio L. Settings DIMMING CURVE The dimming curve is the correlation between the change in the value of the dimming control and the actual change in the fixture’s light intensity. Curve is also the extent to which the fixture delays its response time to the control signal in order to smooth dimmin To set the Dimming Curve of the fixture push and then push the CURVE button.
Page 80: Fixture Control
Location Studio M. Fixture control Fixture control • Ethernet Art-Net (exclusively on KOSMOS Studio) • KOSMOS Location has wireless control of Art-Net via Wi-Fi • KOSMOS Studio has two Art-Net* control options: - Wire control through Ethernet RJ-45 connect - Wireless control through Wi- *Art-Net™...
Page 81: Wireless Control
KOSMOS Location • DMX-RDM through LumenRadio CRMX • Wi-Fi Art-Net to control from smartphone or tablet with VELVET GOYA* App (or any third party device or App). • Bluetooth control from smartphone or tablet with VELVET GOYA* App (or any third party device or App).
Page 82: Wi-Fi Art Net
PARA ENLAZAR EL KOSMOS CON CUALQUIER DISPOSITIVO WI-FI Smartphone, tablet or computer it is mandatory to use a VELVET Router (ref. VE-ROUTER) or alternatively any Wi-Fi router in which you need to change the SSDI and password to make it compatible with KOSMOS.
Page 83 Location Studio Studio M. Fixture control TO ACTIVATE WI-FI Push and push the REMOTE button. Select WI-FI. The fixture will now automatically connect to any available VELVET Router Once “WI-FI” is activated, the color display will show the following information:...
Page 84 If you do not press USE GOYA, you will be able to have Wi-Fi control but not with the profile that VELVET Goya uses, i.e., the commands will respond but not with the proper parameters. WI-FI CONTROL VIA THIRD PARTY APPS...
Page 85: Bluetooth
Location Location Studio Studio M. Fixture control TO DISACTIVATE WI-FI Push ESC to exit from the Wi-Fi screen and the KOSMOS will no longer react to Wi-Fi command. NOTA As soon as a wired signal is detected via the other interfaces (DMX- 512A through XLR-5connector or Art-Net through RJ45 Ethernet connector) any Wi-Fi data will be ignored and the KOSMOS only processes the wired DMX/RDM signal or the Ethernet.
Page 86 Location Studio Studio M. Fixture control BLUETOOTH CONTROL VIA VELVET GOYA APP Push the button USE GOYA to activate the function so that the button turns into green. USE GOYA BLUETOOTH CONTROL VIA THIRD PARTY APPS Deactivate the USE GOYA function (the button turns gray) and press the button and then DMX.
Page 87 Location Location Studio Studio M. Fixture control TO DISACTIVATE BLUETOOTH Push ESC to exit from the BLUETOOTH screen and the KOSMOS will no longer react to Wi- Ficommand NOTA As soon as a wired DMX signal is detected via the other interfaces (DMX-512A via the XLR5 connector or wired Art-Net via the Ethernet RJ-45 connector), any wireless Art-Net data will be ignored and the KOSMOS will only process the wired signal.
Page 88: Velvet Goya App
• Wi-Fi to control unlimited number of fixtures up to 100 meters/ 330 control feet distance through a VELVET Router (sold separately). • BLUETOOTH to individually control up to 4 fixtures from up to 30 meters / 100 feet distance.
Page 89 “No internet”. • Open the VELVET Goya app on the device you are going to work from, select SINGLE CONTROL or PROJECTS, depending on your needs and press the Wi-Fi icon to discover the available KOSMOS and/or EVO...
Page 90 • Turn on the device you are going to work from. via BLUETOOTH • Enable Bluetooth on your smartphone or tablet • Open VELVET Goya app on your device, select SINGLE CONTROL or PROJECTS in Goya and press the BLUETOOTH icon to discover available KOSMOS and/or EVO accessories.
Page 91: About
Location Location Studio Studio M. Fixture control ABOUT Shows fixture model, fixture serial number, firmware version, RDM ID, Ethernet ID MAC, fixture temperature and LED running hours. FIRMWARE UPDATE On the touchscreen push and select ABOUT. On the sub-menu select UPGRADE. To update the System Firmware push SYSTEM and follow the instructions written on the screen.
Page 92: Maintenance And Care
M. Fixture control MAINTENANCE AND CARE A visual inspection should be conducted before every use, and an inspection of electrical safety should be conducted at least once every 12 months. Do not clean the fixture with solvents or strong detergents. Clean the product with a soft cloth wetted with a mild detergent.
Page 93 Location Location Studio Studio M. Fixture control HOW TO CLEAN THE INSIDE OF KOSMOS Clean the glass Fresnel lens with a soft, damp cloth. Carefully clean the LED light engine lens and reflector with isopropyl alcohol and a cotton swab. Clean the electrical contacts with cotton swabs dipped in isopropyl alcohol.
Page 94: Regulations
VELVET Cyc3, Cyc4, Cyc5, Cyc6 VELVET Mini 1, Mini 2, Mini 3 VELVET Mini Power 1, Mini Power 2 VELVET Light 1, Light 2, Start 2, Light 2x2, Light 4 VELVET Power 1, Power 2, Power 2x2 VELVET Sword 2, Sword 4.
Page 95 Location Location Studio Studio N. Regulations DIRECTIVE 2011/65/EU of the European Parliament and of the Council of 8 June 2011on the restriction of the use of certain hazardous substances in electrical and electronic equipment. In compliance with the harmonized standards: IEC 60598-1:2014 Luminaires - Part 1: General requirements and tests.
Page 96: Warranty
O. Warranty Warranty General warranty VELVET LED light equipments are guaranteed to be free from defects in workmanship and parts in a warranty period of two (2) years from the date of purchase. Defects that occur within this warranty period, under normal use and care will be repaired or replaced at VELVET discretion, solely at our option with no charge for parts or labour.
Page 97 The total or partial reproduction of this guide is prohibited without the express written permission of VELVET. VELVET technology is protected under Spanish license laws with international patents pending. Information and specifications in this document are subject to change without notice.
Page 98: Qr Links
P. QR Links QR Links KOSMOS website link KOSMOS suport documents link • Última versión del Manual de usuario • Descarga el último firmware • Configuración del Router • Folleto • Última versión del mapa DMX...
Page 99 velvetlight.tv...
Page 100 Design, Engineering & Production center Carrer de la Cerdanya. 11A 08192 — St. Quirze del Vallès Barcelona (Spain) +34 937 073 011 info@velvetlight.tv VELVET USA Office 7411 Laurel Canyon, unit 3 North Hollywood, CA 91605 +1 (818) 358 2888 usa@velvetlight.tv velvetlight.tv...

This manual is also suitable for:

Kosmos 400 Vk400cny Vk400cstny