Advertisement
Quick Links
Advertisement
Summary of Contents for KautenjaDSP Step Saw
- Page 1 KautenjaDSP...
- Page 2 Step Saw v2.0.0 Overview Step Saw is an emulation of the Konami VRC6 sound chip from the Nintendo Entertainment System (NES). The VRC6 chip contains two pulse wave generators, and a quantized saw wave generator. Step Saw provides the key features of the VRC6 chip, namely,...
-
Page 3: Panel Layout
KautenjaDSP Step Saw v2.0.0 Panel Layout 1 Frequency The trimpot controls the coarse frequency of the three waveform generators. Frequency is quantized to a 12-bit value for the oscillators, which is particularly noticeable in the very low / high registers. The ports provide an exponential /Octave input for controlling the pitch of the tone generators. -
Page 4: Pulse Width
KautenjaDSP Step Saw v2.0.0 can be used as an attenuverter to attenuate / polarize the incoming signal. Inputs are normalled forward from Tone 1, to Tone 2, to Saw, and support audio rates. 3 Amplifier When no input is connected, the trimpot controls the given waveform generator volume level with 4-bit resolution (i.e.,... -
Page 5: Data Sheet
KautenjaDSP Step Saw v2.0.0 Data Sheet Type Oscillator Size 8 HP Eurorack Depth Power draw (mA) 0 mA draw (mA) 0 mA draw (mA) 0 mA Sample Rate Programmable Bit Depth 16-bit... - Page 6 KautenjaDSP Step Saw v2.0.0 References Green, S. (2003). NES Sound Emulator (Nes Snd Emu). http://www.slack.net/ ~ ant/libs/ Horton, K. (1999). VRC6 Chip Info. https://nesdev.com/vrcvi.txt...