HARDWARE CONTENTS Part Description Quantity Picture ø 5/16" x 1 3/4" L Hex. Head Bolt ID 5/16" Spring Washer ID 5/16" x OD 3/4" Flat Washer 1/4" x 5/8" L Pan Head Bolt ID 1/4" Spring Washer ID 1/4" x OD 5/8" Flat Washer Mounting Plate 1/4"...
Page 4
PREPARATION Before installing product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to install the product. Please contact the store where the product was purchased. Estimated assembly time: 20 minutes.
Page 5
Step 3 Attach Leg (D) & (E) to corner block of Vanity (A) using Hex. Head Bolt (AA), Spring Washer (BB) and Flat Washer (CC), tighten with Phillips head screwdriver. For bottom leg bolt, tighten with screwdriver or wrench as an option. Step 2 &...
Page 6
Hardware Used In Step 4 1/4" x 5/8" L Pan Head Bolt ID 1/4" Spring Washer ID 1/4" x OD 5/8" Flat Washer Step 5 Turn the Vanity upright. Attach Mounting Plate (GG) to Backsplash (B) and back of Vanity (A) using Pan Head Bolt (HH), tighten with Phillips head screwdriver.
CARE AND MAINTENANCE Avoid placing your furniture in direct sunlight, as sunlight causes fading. Avoid extreme changes in temperature by arranging furniture away from radiators, heating and air vents or air conditioning units. Clean up excess water and spills immediately. Use a blotting rather than a wiping action.
Page 8
POP-UP ASSEMBLY INSTRUCTIONS UBERHAUS RONA SKU#: 74805007 VANITY Pop-up Drainpipe 1-1 Sink With Rubber Gasket Drain Hole Vanity Top Rubber Gasket With Sink Rubber Gasket "U" Drainpipe Rubber Gasket Vanity Top With Sink "L" Drainpipe Sink With Drain Hole Sink With...