LV switch IAD Series User Manual
  1. Manuals
  2. Brands
  3. LV switch Manuals
  4. Gateway
  5. IAD Series
  6. User manual

LV switch IAD Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IAD SERIES USERS MANUAL
LVswitch IAD Series Users Manual
Guangdong Shanglu Information Technology company
All rights reserved
www.lvswitches.inc
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IAD Series and is the answer not in the manual?

Questions and answers

Summary of Contents for LV switch IAD Series

  • Page 1 IAD SERIES USERS MANUAL LVswitch IAD Series Users Manual Guangdong Shanglu Information Technology company All rights reserved www.lvswitches.inc...

  • Page 2: Table Of Contents

    IAD SERIES USERS MANUAL Catalogue 1.Product Introduction ..............................5 1.1 Product Overview ............................5 1.2 Functions and features ...........................5 1.3 Product Seris ..............................6 1.4 LVswitch-4S ............................6 1.5 LVswitch-8S .............................7 1.5 Product specifications: ..........................11 1.5.1 Hardware specifications: ........................11 1.5.2 Software specifications ..........................
  • Page 3 IAD SERIES USERS MANUAL 4.2.8 Network U disk ..........................43 Figure 4-21 Network USB configuration ........................44 4.2.9 Local subinterface ..........................45 Figure 4-22 Network USB configuration ........................45 4.2.10 IGMP PROXY ..........................45 5.Voice Configuration ..............................46 5.1 Operate mode setting ........................... 46 5.2 SIP USER SET .............................46...
  • Page 4 IAD SERIES USERS MANUAL Dear Customer: IAD series gateway is a powerful and excellent terminal product specially customized by ShangLu information technology ltd for customers,which provides you with a flexible, safe and complete enterprise network solution.It is simple to configure, easy to operate, flexible to use, safe and reliable,you can also get the technical support from Shanglu.

  • Page 5: Product Introduction

    IAD SERIES USERS MANUAL 1.Product Introduction 1.1 Product Overview LVswitch IAD product is a high-performance, multi-purpose voice access gateway designed by Shanglu information technology limited for small and medium-sized enterprises.The products support voice, security, VPN and other functions, to meet the needs of operators or virtual operators, enterprises through IP access to provide users with broadband, voice and fax services.The product can be used be IPPBX equipment to set up cross...

  • Page 6: Product Seris

    IAD SERIES USERS MANUAL 1.3 Product Seris LVswitch IAD series product includes the following 4 kinds : LVswitch IAD Series Description LVswitch-4S 4FXS Voice gateway LVswitch-8S 8FXS Voice gateway LVswitch-16S 16FXS Voice gateway LVswitch-32S 32FXS Voice gateway 1.4 LVswitch-4S LVswitch-4Ssupports 4 fxs interface ,the front panel is as below:...

  • Page 7: Lvswitch-8S

    IAD SERIES USERS MANUAL Instrutions AC input Power button USB2.0 interface 10/100/1000MEthernet interface :1WAN+3LAN，RJ45 Console，RJ45 4FXS analog interface ，RJ11 Ground column 1.5 LVswitch-8S LVswitch-8S support 8 fxs telephone interface,the front panel as following:...
  • Page 8 IAD SERIES USERS MANUAL Instrutions Reset indicator PWR,SYS indicators VPN,NMS,USB indicators Ethernet indicators 8 FXS light indicators LVswitch-8S Back panel is as below ： Instrutions ① AC input ② Power button ③ USB2.0 interface 10/100/1000MEthernet interface :1WAN+3LAN，RJ45 Console，RJ45 8 FXS analog interface ，RJ11...
  • Page 9 IAD SERIES USERS MANUAL LV switch-16S panel is as below: Instrutions RESET BUTTON Power and System indicator VPN、network management ,USB indicator 4 Ethernet indicators Instrutions AC input Power button USB2.0 interface 10/100/1000MEthernet interface :1WAN+3LAN，RJ45...
  • Page 10 IAD SERIES USERS MANUAL Console，RJ45 16 FXS analog interface ，RJ11 Ground column LVswitch-32S LVswitch-32Ssupports 32 voice interface，The front panel as belows: Instrutions RESET BUTTON Power and System indicator VPN、network management ,USB indicator Ethernet indicator LVswitch-32S Back panel is as below ：...

  • Page 11: Product Specifications

    IAD SERIES USERS MANUAL Instrutions AC input Power button USB2.0 interface 10/100/1000MEthernet interface :1WAN+3LAN，RJ45 Console，RJ45 32 FXS analog interface ，RJ11 Ground column 1.5 Product specifications: 1.5.1 Hardware specifications: Description Item Network interface 1 WAN,3LAN,RJ45 port,rate10/100/1000M LVswitch-4S：4*RJ11 LVswitch-8S：8*RJ11 FXS interface LVswitch-16S：16 *RJ11 LVswitch-32S：32 *RJ11...

  • Page 12: Software Specifications

    IAD SERIES USERS MANUAL LVswitch-4S ≤20W LVswitch-8S： ≤25W Power LVswitch-16S： ≤35W LVswitch-32S： ≤45W LVswitch-4S： ≤1.6KG LVswitch-8S： ≤1.8KG Weight LVswitch-16S： ≤2.0KG LVswitch-32S： ≤2.2KG Operating environment temperature -5℃～55℃ Ambient relative humidity 95% (non-condensation) Working environment requirements No performance degradation within 3000m above sea level Atmospheric pressure 86KPa~106KPa The concentration of particles in the air≤180mg/m3...
  • Page 13 IAD SERIES USERS MANUAL milliseconds long Comfortable background sound, silent compression (VAD) Supports signaling and media DSCP/TOS tagging Digitmap DTMF RFC2833、SIP INFO、INband RJ11 interface，Support sending reverse FXS call polarity，DTMF dialing，FSK caller ID SIP users SUPPORT up to 32 SIP extensions...

  • Page 14: Preparation Before Installation

    IAD SERIES USERS MANUAL SUpport configuration backup&recover、 System maintenance Support software upgrade、Support factory default reset、Time setting 2.Preparation before installation 2.1 Safety precautions During the installation and use of the equipment, please pay attention to the following safety precautions. case Please...

  • Page 15: Basic Connection Configuration

    IAD SERIES USERS MANUAL the power When installing Do not place any equipment, please leave object on the device or a heat dissipation space on the power cord or above 10cm around and plug. Please do not on the top, and keep...

  • Page 16: First Time Use And Basic Connection And Configuration

    IAD SERIES USERS MANUAL Figure 2.1 Application environment 2.2.2 First time use and basic connection and configuration When for the first use, the product must be installed by the engineer. If you (enterprise network administrator or responsible person) need to adjust the equipment during the use, please refer to the following instructions.

  • Page 17: Turn On The Power

    IAD SERIES USERS MANUAL Connect one end of the power adapter to the power interface of the product, and then insert the power cord plug into the power socket. Input ac power supply range: 100V a.c. ~ 240V a.c. 50/60 hz 2.2.4 2 Turn on the power...
  • Page 18 IAD SERIES USERS MANUAL Figure 2-4 Internet connection (2) On the Internet connection page, click LAN Settings, as shown in figure 2-5. Make sure that the radio box before "LAN USES proxy server" is not checked. Figure 2-5 Set Proxy Server Set the IP address of the user's computer Before accessing configuration page, it is recommended to set the computer to "automatically obtain IP...
  • Page 19 IAD SERIES USERS MANUAL address" and "automatically obtain DNS server address", and the IP address will be assigned by this product. If you need to specify a static IP address for your computer, you need to set the computer's IP address and the product's LAN port IP address in the same network segment (the device LAN) The port default IP address is 192.168.200.1;...
  • Page 20 IAD SERIES USERS MANUAL 2-7 Log in page (2) Choose the language English, Enter a user name and password in the login window and click the < login > button. After password verification, you can enter the configuration page of the product, as shown in figure 2-8: The default USER NAME is admin,and the default password is “admin”...

  • Page 21: Operation Button Description Of The Web Setting Page

    IAD SERIES USERS MANUAL If you close the browser without clicking logout, you exit after the timeout period,and no one can log in the equipment during. 2.3.2 Operation button description of the Web setting page In the following chapters 6-11, we will introduce how to operate this product in detail. The main buttons of the product are described as follows.

  • Page 22: System Status

    IAD SERIES USERS MANUAL Before configuration, click "Summary " at the top of the page to enter the device overview page. 3.1 System status System status includes Device, interface,WIFI,3G and Voice status. 3.1.1 Device Select”Summary” and “system status” and “device” and enter in the device page as shown in picture 3-1.

  • Page 23: Info Statistics

    IAD SERIES USERS MANUAL the number of packets sent and received. Manual connect and disconnect buttons are provided for PPPOE dial-up lines. Click the < refresh > button to display interface information for the current time. 3.1.3 Voice status Select”system status” then “voice status”,you can see the current status of the voice users.

  • Page 24: On Line Users

    IAD SERIES USERS MANUAL 3-5 Virtual interface statistics The virtual interface statistics show the upstream and downstream rates and traffic of the VLAN port and WAN sub-interfaces that have been enabled. If the WAN sub-interfaces are not enabled, the upstream and downstream rates and traffic of the WAN port will be displayed.

  • Page 25: Network Configuration

    IAD SERIES USERS MANUAL Wireless user statistics can visually see all wireless user host name, IP address, uplink and downlink speed, uplink and downlink traffic, connection session numbers. Click < Refresh > Button to display the wireless user information of the current time.

  • Page 26: Uplink Mode Setup

    IAD SERIES USERS MANUAL 4.1.1 Uplink mode setup Select<Network> and <Basic Setup> then <Upmode>, and the <Upmode>page pops up as the following as figure4-1. Figure 4-1 Uplink mode setting Under ethernet upmode,the Wan port of the device serves as the uplink Ethernet interface, which supports the hybrid mode of TAG and UNTAG under the sub-interface mode.
  • Page 27 IAD SERIES USERS MANUAL Select<Basic setup> and <Wan setup> and click the <Basic settings> tab, the WAN port setting page pops up as below: 4-3 basic settings of WAN mode Wan port operation mode Single WAN: work under <Ethernet uplink mode > or<WIFI uplink mode>...
  • Page 28 IAD SERIES USERS MANUAL 4-4 3G card connection Settings The setting of 3G card connection is as follows: Interface Items Instruction 3G Card Status card connection successful,it will display”exist”,if no 3G card connection,it will display”noexist” Uimcastat If there is UIM card,it will display”exist”if no it will display”noexist”...
  • Page 29 IAD SERIES USERS MANUAL CHAP ：Challenge Handshake Authentication Protocol) MS-CHAP：Microsoft's version of the PPP challenge handshake authentication protocol AUTO: The authentication type needs to be the same with the PPP server, depending on which class is selected Please consult your ISP.
  • Page 30 IAD SERIES USERS MANUAL 4-5 PPPOE to access IP address Select “IPv4” as the protocol type and enter the user name and password of the user's broadband account in the Username and Password fields. The interval of the redial and MTU are default. The IPv4 DNS mode can be selected according to the actual network configuration, options are"Dynamically obtained DNS"or manually...
  • Page 31 IAD SERIES USERS MANUAL Method peer end when the product first time connected to the network. Manual: Configure the IPv6 gateway address in the text box below. Select IPv4 / IPv6 as the protocol type, configure IPv4 protocol and IPv6 protocol respectively. The device can access the network through both IPv4 and IPv6.
  • Page 32 IAD SERIES USERS MANUAL Select IPv4 / IPv6 as the protocol type, configure IPv4 protocol and IPv6 protocol respectively. The device can access the network through both IPv4 and IPv6. DHCP way to obtain the WAN port address  Select "DHCP" in the "Connection Type" drop-down list on the "Basic Settings " page as shown in Figure4-7.
  • Page 33 IAD SERIES USERS MANUAL Obtaining Method based on the advertisement of the routing information sent by the peer end when the product first time connected to the network. Manual: Configure the IPv6 gateway address in the text box below. Select the protocol type as "IPv4/IPv6", respectively configure the IPv4 and IPv6 protocols, the device can use...
  • Page 34 IAD SERIES USERS MANUAL Figure4- 9 WAN Subinterfaces Configuration WAN Subinterfaces Configuration description： Item Description Enable Enable subinterface option or not Subinterface Negotiate with the WAN port switch equipment in consensus Negotiate with the WAN port switch equipment in 802.1P consensus Internet：The sub-interface for Internet...
  • Page 35 IAD SERIES USERS MANUAL Item Description  Management-Voice-Internet: This type of compatible management, Internet access and voice；  Other：Other types. Subinterface Options: Gateway, Bridge Mode Connection Options include static IP, DHCP, PPPOE, configuration Type method is same with the one of WAN port.

  • Page 36: Dhcp Configuration

    IAD SERIES USERS MANUAL 4.1.4 DHCP Configuration Select “Basic Setup> DHCP”. The DHCP Settings page is displayed as shown in Figure 4-11. Figure4- 11 DHCP SERVER Configuration ........When DHCP service is select as ” Disabled”, the DHCP function on the LAN port is disabled.

  • Page 37: Advanced Options

    IAD SERIES USERS MANUAL Figure4- 12 DHCP RELAY Configuration DHCP Service: Select "DHCP RELAY" to open page shown in Figure5-11. If the DHCP client and  DHCP server are not on the same physical segment, the DCHP Relay Agent (Relay Agent) is required.

  • Page 38: Static Route

    IAD SERIES USERS MANUAL Figure 4-13 DDNS setting The DDNS setting instructions are as follows: Table 4-3 DDNS setting Terms Instruction Enable or disable the DDNS service, the default DDNS update value is enabled Choose a provider of domain name...

  • Page 39: Dynamic Route

    IAD SERIES USERS MANUAL Figure 4-14 Route setting page Add route configuration description： Table 4- 4 Add Routing Item Description Name User defined route name. The destination address need to reach, it could be network Destination IP address or host address.

  • Page 40: Nat Setting

    IAD SERIES USERS MANUAL Items Description Click “enable” to enable Routing Information Protocol Consistent with docking routing devices, optional "default", "RIPv1" And "RIPv2". Version Select "default" to automatically negotiate with the docking routing device. Select “ RIPv1” ,no need to encrypt.

  • Page 41: Port Mapping

    IAD SERIES USERS MANUAL Click <Add> button to open the “Add NAT Configuration”page as shown in Figure 4-17 Add NAT Configuration Figure 4-17 Add NAT Configuration： Table 4- 17 Add NAT Configuration Item Description Select WAN port.or wan sub interface port. NAT configuration...

  • Page 42: Host Name Setting

    IAD SERIES USERS MANUAL Click <Add> button to open Add Port Mapping page shown in Figure 4-18. Figur4-18 Add Port Mapping Add Port Mapping Description： Table 4-18 Add Port Mapping Item Description Any ports：In this mode, all ports will be mapped.

  • Page 43: Alg Setting

    IAD SERIES USERS MANUAL Figure 4-19 Host name setting page Host name setting description as following: Table 4-19 Host name setting description Interface Instruction IP address Intranet IP address Host name Set the host name of the intranet IP,the length is 1-67 characters 4.2.7 ALG setting...
  • Page 44 IAD SERIES USERS MANUAL Figure 4-21 Network USB configuration The setting instructions of network usb flash drive are as follows: Table 4-21 network U disk Settings Terms Description The product's USB interface is attached to the storage device, showing "USB connected";...

  • Page 45: Local Subinterface

    IAD SERIES USERS MANUAL Terms Description Samba service setting Select the radio box to enable the samba service. Enable On Windows, the Intranet user clicks "start > run" and samba enters "\\ device LAN port IP address \usbshare" to service access the network usb drive.

  • Page 46: Voice Configuration

    IAD SERIES USERS MANUAL interface is the interface connect with IGMP router,which can be WAN 5 or WAN sub-interface according to the drop-down box. 5.Voice Configuration Voice configuration includes operate,SIP user set,SIP server set, Digitmap ,Codec set,IAD global set and Suppservice.
  • Page 47 IAD SERIES USERS MANUAL Figure 5-2 SIP user set This product provides 8 FXS ports, 8 analog phones can be hung under the maximum support, 8 users can be added, the page has been configured with the internal number of 8 users. The user here is SIP user, go to analog channel.
  • Page 48 IAD SERIES USERS MANUAL When choose “H.248” as voice mode,select <Voice work> and <H.248 USER SET> entering the H.248 user setup as the following page Page 5-3 H.248 user setup This product provides 8 FXS ports, 8 analog phones can be hung under the maximum support, 8 users can be added, the page has been configured with the internal number of 8 users.

  • Page 49: Sip Server Set

    IAD SERIES USERS MANUAL authentication and account and password verification. 5.3 SIP server set When selecting "IMS" or "NGN" in the voice mode, select <Voice set ><Voice work><SIPserver set> and enter the "SIP server setting" page as shown in figure 5-4.

  • Page 50: H248 Parameter Setting

    IAD SERIES USERS MANUAL message and negotiate with the opposing device. Master SIP proxy server address Set the IP address of the primary SIP proxy server. Port number Set the primary SIP proxy server port number. Trans protocol Select the transport protocol that transports the SIP message and negotiate with the opposing device.
  • Page 51 IAD SERIES USERS MANUAL Figure 5-5 H248 parameter setting...
  • Page 52 IAD SERIES USERS MANUAL Items Instructions Soft switch server setup Main_softaddr Sets the IP address of the primary MGC. Port Set the main MGC port. The default value is 2944. Alternate_softaddr Set the IP address of the standby MGC. Port Set the standby MGC port.The default value is 2944...

  • Page 53: Configuration Sample

    IAD SERIES USERS MANUAL recommended to keep the default value.35S. Retran_interval Set the message retransmission interval. It is recommended to keep the default value.4Seconds. Link_mode “Notify” 、 “ ServiceChange”and “Audit” or no three modes Heart_period Configure h. 248 heartbeat cycle, which is the time set after the first successful registration of the device.

  • Page 54: Codec Setting

    IAD SERIES USERS MANUAL “ims.js.chinamobile.com”.Main SIP external proxy server IP address “120.195.9.148”.The port number is “5060”,the transport protocol”UDP”,other keeps the default value as below. The user number register to IMS soft switch platform. The SIP user number is “+8651280910482”，The authentication user name is “+8651280910482@ims.js.chinamobile.com”,the authentication password “14785236”.Select “enable”and click...

  • Page 55: Iad Global Set

    IAD SERIES USERS MANUAL Figure 5-9 Configure the codec orders of the device,it should be negotiated with the opposite device in the order of priority encoding and decoding 1, 2, 3, 4 and 5. 5.7 IAD GLOBAL SET Select <Voiceset><Voicework> and <IAD globalset>,then the page pops up as the following...
  • Page 56 IAD SERIES USERS MANUAL...
  • Page 57 IAD SERIES USERS MANUAL 5-10 Global set Item Instruction Global set GC_domain Government and enterprise gateway domain name Voicecall_ims_port The default value is 9060, which can also be negotiated with opposite devices. Voicecall_sip_port The default value is 5060which can also be the same...
  • Page 58 IAD SERIES USERS MANUAL device generates a mute packet during the mute period, saving bandwidth and making both parties comfortable. dsp_compress_mute Enable mute compression, detect the mute in the call stage and process it to save network bandwidth and reduce time delay; If mute compression is disabled, a normal sound signal is generated and transmitted even if mute is detected.

  • Page 59: Digitmap

    IAD SERIES USERS MANUAL NoAnswerTimer After the user dials,set how long there is no answer and play the prompt tone. fxs_pch_time Judge the patting fork action of the user, and it is considered to be the patting fork action within the set time range, and it is considered to hang up if the time exceeds the set time.

  • Page 60: Suppservice

    IAD SERIES USERS MANUAL send called code, that is, when the called number dialed by the user conforms to one of the dialing schemes defined in the dialing rules, this product will immediately send this called number. Select the <Voiceset> and <Digitmap>,the digitmap page is as following Figure5-8 Digitmap Please refer to the page description for the description of dialing rules.
  • Page 61 IAD SERIES USERS MANUAL parameters belong to the data subscribed to the core network, that is, they can only be used if the core network can support these services. Select "working mode > supplementary service" and the page as shown in figure 5-11 pops up.

  • Page 62: Network Security

    IAD SERIES USERS MANUAL HotlineType Rejectcall: the hotline is not activated Immediatelyhotline: refers to the user will not hear the dialing tone after the phone is picked up,it will immediately sent to the called number; Delay hotline: if the user does not dial the number within the delay time after picking up the phone, it will automatically transfer to the called number.

  • Page 63: Basic Setting

    IAD SERIES USERS MANUAL 6.1Basic setting Select<Security> and <basic setting> then the basic setting will pop up as following. Figure 6-1 Basic setting The basic setting as following Items Instruction only_lan If the administrator is allowed to log in the web management page of this product from LAN port, the default value is off.
  • Page 64 IAD SERIES USERS MANUAL Figure6-2 Firewall ACL access control policies for packets derived from the basic interface have been predefined in this product. Users can modify the policy target by clicking the target item. Click the < add > button and enter the page of "add ACL access control rules" as shown in figure 6-3.

  • Page 65: Arp Defense

    IAD SERIES USERS MANUAL Souce IP port number Set the source port number matching this packet rule,the value range is 0~65535.This rule applies to any port number when this parameter is not set by the user. Destination IP Set the destination IP address that matching this packet rule.When the users doesn’t set the data,any destination...

  • Page 66: Arp Defense

    IAD SERIES USERS MANUAL Figure 6-4 IP/MAC binding Click the < import from system> button from the system, and the device will automatically learn the IP/MAC binding information in the ARP list, which will be displayed on the IP/MAC binding page.

  • Page 67: Ddos Defense

    IAD SERIES USERS MANUAL Clients who do not match IP/MAC binding Set whether users in the IP/MAC list have access to rule cannot access Internet (when the external networks. Check that only addresses enabled in IP/MAC binding table is empty, all clients the IP/MAC list can access the external network.

  • Page 68: System Management

    IAD SERIES USERS MANUAL enable this function. It is recommended to turn on all preventive functions without special requirements. Open the TCP Flood attack defense, UDP Flood attack defense and ping Of Death attack defense, you can set the connection limit according to the traffic Of the server under normal circumstances, generally keep the default value.

  • Page 69: Backup And Restore Configurations

    IAD SERIES USERS MANUAL 7.3 Backup and restore configurations If you have backed up the system setting information before, you can restore the current setting to the previous backup setting to ensure the normal operation of the product and reduce the loss caused by the loss of information when the system setting information of the product is lost due to wrong operation or other circumstances.

  • Page 70: Upgrade

    IAD SERIES USERS MANUAL box, find out the backup file,click<open> button.In <maintain>page ,select<restore> button, then it will appear the succesful page as following Figure 7-5 backup restore successful Result:The system restarts and returns to the imported configuration information state. USB import backup configuration process as follow: After selecting the configuration file in USB, click the <...

  • Page 71: Snmp Setting

    IAD SERIES USERS MANUAL Figure 7-7 system upgrade successful Result: The system is restarted and upgraded to the latest version. During the upgrade process, the system indicator light shows red slow flashing. After the upgrade is successful, the device is restarted.The system indicator light shows green quick flashing. After the login page pops up, if it works normally, the system indicator light shows green slow flashing.
  • Page 72 IAD SERIES USERS MANUAL Interface item Instruction SNMP setting SNMP Status SNMP is optionally enabled or disabled, with the default being enabled. SNMP Version SNMP Version can be VI V2 V3 default value is V3 SNMPTRAP version V1 V2 V3...

  • Page 73: Tr069 Configuration

    IAD SERIES USERS MANUAL Private TRAP Setting CPU Utilization Threshold Send TRAP alarms when the device CPU usage exceeds the threshold. Enabled by default, the default value is 99. Memory Utilization Threshold Send TRAP alarms when the device memory usage exceeds the threshold.
  • Page 74 IAD SERIES USERS MANUAL Figure7- 10 Settings TR-069 Settings Description： Item Description TR069 Settings The Setting items are described below. TR-069 Status Options "Enable" or "Disable", Enable TR-069 Status by default. Authenticate Optional, Yes or No, the default is No.

  • Page 75: Reboot

    IAD SERIES USERS MANUAL Item Description initiate a connection request to the CPE. Value range: 1 ~ 32 characters When this product is in a private network, it uses the datagram protocol to establish a port mapping on the product that interacts with the ACS through the STUN...

  • Page 76: Restore Factory Default

    IAD SERIES USERS MANUAL Do not power off during resboot.  Network communication will be temporarily interrupted  during resboot. 7.8 Restore Factory Default Run Restore Factory Default, all the setting information of the product will be deleted and return to the factory default configuration status.

  • Page 77: Time Settings

    IAD SERIES USERS MANUAL Figure - 13 Debug Step 2 Select the diagnostic tool needed and enter the IP addr or Domain Name of the destination device in the Diagnostic Address text box. Step 3 Click the “Run”button to start the debug.

  • Page 78: Log Manage

    IAD SERIES USERS MANUAL Item Description Check to enable NTP service function. The default value Enable NTP Time Zone is Enable. Select the time zone of the product, the default is GMT + Time zone 08: 00 China standard time.
  • Page 79 IAD SERIES USERS MANUAL Item Description Description. Select a query item, set the content need to query. If select "Time", set the time range in the Time Range box and click <Query>, the query result will be shown in the following list.
  • Page 80 IAD SERIES USERS MANUAL Item Description Specify the log type to be displayed. Select the radio RecordType button to display the corresponding log information. Select to display the log information level, including "warning", "err", "crit", "alert", "emerg" five levels, the Logging Level level of severity increases in order.

  • Page 81: Account Management

    IAD SERIES USERS MANUAL 8.Account Management Before configuration,please select “Object” on top of the page,then enter into the object management page. 8.1 Object Management Add users to user management and give users relevant business rights. When using the network U disk, SMS, VPN service, users with corresponding rights shall conduct identification, and the service can be used after the authentication.

  • Page 82: Product Problem Analysis

    IAD SERIES USERS MANUAL management page; Select "disable" and "this user has no access to the page" pops up. Status Select "enable", the user can normally use; Select disable. This user is currently unavailable. 9.Product problem analysis Why is the POWER indicator not on? Answer: Check that the power adapter matches.

This manual is also suitable for:

Iad1004s8s16s32s

Table of Contents