Table of Contents
Advertisement
Quick Links
Vacuum Cleaner Robot
User manual
Suzhou Octopus Robot Co., Ltd.
Design：
Size:140*210mm
Page：28p
Proportion：1:1
Change Log：
Basic Technical Requirements For Flat Prints
Date:2022.04.11
Material：100g Double copper paper
Printing color: monochrome printing
Binding method: saddle stitching
Material name
User Manual
Product number
T7, T7C-W, T7C-B
0208000001
Item number
Edition
V01 (04.11)
Advertisement
Table of Contents
Summary of Contents for Octopus Robot T7
- Page 1 Vacuum Cleaner Robot User manual Basic Technical Requirements For Flat Prints Suzhou Octopus Robot Co., Ltd. Date:2022.04.11 Material name User Manual Design： Product number T7, T7C-W, T7C-B Material：100g Double copper paper Size:140*210mm Page：28p Printing color: monochrome printing 0208000001 Item number Edition V01 (04.11)
- Page 2 Laser Navigation Intelligent Vacuum Cleaner Robot User Manual A p p l i c a b l e M o d e l ：T7, T7C-W, T7C-B Suzhou Octopus Robot Co., Ltd. Please read this manual carefully before use and retain it for future reference.
- Page 3 Safety Regulations Please be vigilant and follow the following matters when using the product. Please read this manual carefully before use and retain it properly for future reference. Notice Warn 1. Only applicable to the original charging stand specially equipped by the 1.
- Page 4 Instructions for disposing of batteries If you want to discard the battery in this machine, please do not throw it away along with household garbage, but hand it over to the nearest waste battery recycling station or after-sales service center for centralized disposal. The following instructions are not for general users, but for the disposal instructions of the final battery disposer.
- Page 5 Sincerely thank you for purchasing the products of Suzhou Octopus Robot Co., Ltd. Hope you enjoy using it. If you encounter any problems during use, please contact our after-sales service center: +86-512-57476881, and there will be professionals to answer your questions. For more details, please visit the official website of Octopus www.octopus-robot.cn...
-
Page 6: Table Of Contents
Content 4.Maintenance···················································17 . Product Components 1.1 Packing List···································································5 4.1 Dust box and filter material······························17 1.2 Part Name·····································································6 4.2 Vacuum Port & Side Brush······························18 1.3 Charging Station/Dust Box+Water tank··································7 4.3 Other Components········································19 2. Product Instruction·····························································8 2.1 Matters Need Attention·····················································8 2.2 Preparatory Work····························································9 5.Light and Voice Alarm Prompt····························20 2.3 The Main Machine Charge················································10 5.1 Lighting Effect Tips······································20... -
Page 7: Product Components
1. Product Components 1.1 Packing list Charging Station Cleaning robot Dust Box + Water Tank Mop Holder & Mop High-efficiency Filter Side Brush Manual Components(HEPA) * The illustrations in this manual are for reference only, and the actual appearance is subject to the actual product. -
Page 8: Part Name
1. Product Components 1.2 Part name Front View Side View Dust box+Water tank Recharge button Machine cover Start/Pause button Machine cover Lidar Anti-collision sensor Back View Universal wheel Bottom shell Side brush Anti-drop sensor Driving wheel Rolling brush Charge electrode... -
Page 9: Charging Station/Dust Box+Water Tank
1. Product Components 1.3 Dust collecting and charging station/dust box+water tank Charging station Power adapter Charging pole Power adapter socket Dust box+Water tank water inlet cleaning tool High Efficiency Particulate Air(HEPA) -
Page 10: Product Instruction
2.Product instruction / 2.1 matters need attention Prevent the sweeper from falling Tidy up the space to be cleaned and chairs, floor fans and other items neatly, and store low objects If the sweeper sweeps in the compound stairway, the edge of the such as weight scales to organize the largest cleaning space steps and other places, please place the guardrail to ensure its safety and smooth operation. -
Page 11: Preparatory Work
2.Product instruction / 2.2 Preparatory work Install the side brush Before use, please remove the protective film on the charging station. Please install the side brush into the installation opening at the bottom of the machine, and you will hear a "click", indicating that the installation is in place. Bottom shell Side brush... -
Page 12: The Main Machine Charge
2.Product instruction / 2.3 The main machine charge Charge Place the charging station / connect to the power supply * The charging station is placed against the wall and placed on a flat ground. Do Place the robot on the charging station, and pay attention to align the charging electrode. -
Page 13: Mode Selection
2.Product instruction / 2.4 Mode selection Start cleaning In the shutdown state, press the power button of the robot. Power on in 5-10 seconds. In the power-on state, short press the power button or click the start cleaning button of the mobile App to start the automatic cleaning mode. In automatic cleaning mode, short press the power button to enter the pause state, short press the power button again to start cleaning. - Page 14 2.Product instruction / 2.4 Mode selection In order to adapt to different ground conditions and achieve deep cleaning, this product has a variety of cleaning modes, which can be selected through the mobile app as needed. After clicking on the whole house cleaning, the sweeper will perform the whole house cleaning. Global Cleaning Mode After the cleaning is completed, the sweeping robot will automatically recharge.
- Page 15 2.Product instruction / 2.4 Mode selection 1、The appointment week is set to a 7-day system. The time is set to 24H system (cannot exceed 00:60, etc.); Appointment mode 2、After low power shutdown, no response to appointment； 3、Does not respond to appointments when the charging state is interrupted. Do not disturb mode will not automatically continue to scan and actively play voices to affect the Do not disturb mode owner's rest。...
-
Page 16: Mopping Function
2. Robot Operation / 2.5 Mopping Function Mopping Operation Maintenance... -
Page 17: App Download And Network Configuration
2. Product use / 2.6 App download and network configuration Method 2: Open the mobile application store, Please connect to 2.4G home Wi-Fi network search for "Octopus Smart", download and install Make sure that the mobile phone is connected to the Wi-Fi network available indoors, and the signal quality is good, register and login to the mobile phone. -
Page 18: Distribution Network Mode
3. Network configuration mode / 3.1 Hotspot mode • Wi-Fi hotspot network configuration(only 2.4G WIFI is supported) App operation Robot Operation Turn on the power switch of the robot. Simultaneously press and hold the "Power button and recharge button" for about 3-5 seconds, until you hear the prompt tone "Wifi has been reset", the machine enters the Wi-Fi hotspot network configuration... -
Page 19: Maintenance
4. Maintenance / 4.1 Dust box and filter When cleaning and maintaining the robot and its accessories, please unplug the power line of charging base. Warning：The dust box and filter should not be exposed to Open the lock of the dust box Take out the dust box from the water. -
Page 20: Vacuum Port & Side Brush
4. Maintenance / 4.2 Vacuum port and side brush Clean the suction port Clean side brush Clean the driving wheel to keep the cleaning smooth; If there is a lot of dust in the suction Pull out the side brush and wipe it with a clean rag. -
Page 21: Other Components
4. Maintenance / 4.3 Other components Clean the anti-collision sensor Clean the anti-drop sensor to ensure the ■ ■ sensitivity of the sensor To clean the charging pole, please use a dry rag to clean the ■ bottom of the robot separately or the charging pole of the charging stand... -
Page 22: Light And Voice Alarm Prompt
5. Light and voice alarm prompt 5.2 Voice alarm prompt 5.1 Lighting effect tips When the robot fails, the robot will voice prompt the cause of the failure, please refer to the following table for query： Cause of Voice Solution Serial issue prompts... -
Page 23: Troubleshoot Common Problems
6. Troubleshoot common problems During the use of the product, if the following problems occur, you can check and solve them by yourself. Troubles Cause of the troubles Solutions Configure the router network and ensure that the router "username" and "password" are entered The router username and password are incorrect. - Page 24 6. Troubleshoot common problems During the use of the product, if the following problems occur, you can check and solve them by yourself. Troubles Cause of the troubles Solutions Before the robot starts working, please arrange the wires, slippers and other items scattered on the ground to minimize the placement of scattered items on the ground.
-
Page 25: Technical Parameters
7. Technical parameters T 7 C Product number Rated input voltage to robot DC24V Robot charging time Less than 6h Lithium battery 5200mAh Battery capacity About 90 minutes Operating time 250ml Dust box capacity 300ml Water tank capacity 4200Pa(maximum) Fan suction AC100-240 V Rated input voltage of charging station Rated input power... - Page 26 Name of harmful substance Harmful materials Lead (Pb) Mercury (Hg) Cadmium Polybromin Polybrominated Hexavalent Parts category and its and its (Cd) and its chromium ated Diphenyl Ether compounds compounds compounds biphenyls (PBDE) (Cr(VI)) and its compounds (PBB) Plastic parts Metals hardware Robot circuit module Electronic Component...
- Page 27 • Warranty period of the whole machine Customer Information Registration Form Product Series Host Warranty Period Customer Contact Name Number T7 Series Vacuum Cleaner Robot One Year Purchase Purchase N7 Series Vacuum Cleaner Robot One Year Model Price...
- Page 28 This device must operate with a minimum distance of 20 cm between the radiator and user body. Website：www.octopus-robot.cn Hotline：+86-512-57476881 Manufacturer： Suzhou Octopus Robot Co., Ltd. ADD： No.123, SISPARK,, 1355 Jinji Lake Avenue, Suzhou Industrial Park, Jiangsu 215021...
- Page 29 Website：www.octopus-robot.cn Hotline：+86-512-57476881 Manufacturer： Suzhou Octopus Robot Co., Ltd. ADD： No.123, SISPARK,, 1355 Jinji Lake Avenue, Suzhou Industrial Park, Jiangsu 215021...