Table of Contents
Advertisement
7. CLEANING AND
MAINTENANCE
7.1 Warning
Turn your mains power
supply off and remove
the plug from the socket
before carrying out
maintenance and
cleaning of your
machine.
Turn off the water
supply before starting
maintenance and
cleaning of your
machine.
CAUTION:
use solvents, abrasive
cleaners, glass cleaners
or all-purpose cleaning
agents to clean your
Washing Machine. They
may damage the plastic
surfaces and other
components with the
chemicals they contain.
Do not
EN - 27
EN - 27
7.2 Water Inlet Filters
Water inlet filters prevent dirt and foreign
materials from entering your machine.
We recommend that these filters are
cleaned when your machine is unable
to receive sufficient water, although your
water supply is on and the tap is open.
We recommend that you clean your water
inlet filters every 2 months.
• Unscrew the water inlet hose(s) from
the Washing Machine.
• To remove the water inlet filter from
the water inlet valve, use a pair of
long-nosed pliers to gently pull on the
plastic bar in the filter.
• A second water inlet filter is located
in the tap end of the water inlet hose.
To remove the second water inlet
filter, use a pair of long-nosed pliers
to gently pull on the plastic bar in the
filter.
• Clean the filter thoroughly with a soft
brush and wash with soapy water and
rinse thoroughly. Re-insert the filter by
gently pushing it back into place.
CAUTION:
water inlet valve may become clogged
due to water quality or lack of required
maintenance and may break down.
This may cause a water leak. Any such
breakdowns are out of the scope of the
warranty.
The filters at the
Advertisement
Table of Contents
